#include <qquicktableview_p.h>

Inheritance diagram for QQuickTableView:

Collaboration diagram for QQuickTableView:

Public Types
enum	PositionModeFlag { AlignLeft = Qt::AlignLeft , AlignRight = Qt::AlignRight , AlignHCenter = Qt::AlignHCenter , AlignTop = Qt::AlignTop , AlignBottom = Qt::AlignBottom , AlignVCenter = Qt::AlignVCenter , AlignCenter = AlignVCenter \| AlignHCenter , Visible = 0x01000 , Contain = 0x02000 }

enum	SelectionBehavior { SelectionDisabled , SelectCells , SelectRows , SelectColumns }

enum	SelectionMode { SingleSelection , ContiguousSelection , ExtendedSelection }

enum	EditTrigger { NoEditTriggers = 0x0 , SingleTapped = 0x1 , DoubleTapped = 0x2 , SelectedTapped = 0x4 , EditKeyPressed = 0x8 , AnyKeyPressed = 0x10 }

Public Types inherited from QQuickFlickable
enum	BoundsBehaviorFlag { StopAtBounds = 0x0 , DragOverBounds = 0x1 , OvershootBounds = 0x2 , DragAndOvershootBounds = DragOverBounds \| OvershootBounds }

enum	BoundsMovement { FollowBoundsBehavior = 0x1 }

enum	FlickableDirection { AutoFlickDirection =0x0 , HorizontalFlick =0x1 , VerticalFlick =0x2 , HorizontalAndVerticalFlick =0x3 , AutoFlickIfNeeded =0xc }

Public Types inherited from QQuickItem
enum	Flag { ItemClipsChildrenToShape = 0x01 , ItemIsFocusScope = 0x04 , ItemHasContents = 0x08 , ItemAcceptsDrops = 0x10 , ItemIsViewport = 0x20 , ItemObservesViewport = 0x40 }

enum	ItemChange { ItemChildAddedChange , ItemChildRemovedChange , ItemSceneChange , ItemVisibleHasChanged , ItemParentHasChanged , ItemOpacityHasChanged , ItemActiveFocusHasChanged , ItemRotationHasChanged , ItemAntialiasingHasChanged , ItemDevicePixelRatioHasChanged , ItemEnabledHasChanged }
	Used in conjunction with QQuickItem::itemChange() to notify the item about certain types of changes. More...

enum	TransformOrigin { TopLeft , Top , TopRight , Left , Center , Right , BottomLeft , Bottom , BottomRight }
	\variable QQuickItem::ItemChangeData::realValue The numeric value that has changed: \l {QQuickItem::opacity()}{opacity}, \l {QQuickItem::rotation()}{rotation}, or \l {QScreen::devicePixelRatio}{device pixel ratio}. More...

Signals
void	rowsChanged ()

void	columnsChanged ()

void	rowSpacingChanged ()

void	columnSpacingChanged ()

void	rowHeightProviderChanged ()

void	columnWidthProviderChanged ()

void	modelChanged ()

void	delegateChanged ()

void	reuseItemsChanged ()

	Q_REVISION (2, 14) void syncViewChanged()

	Q_REVISION (2, 14) void syncDirectionChanged()

	Q_REVISION (6, 0) void leftColumnChanged()

	Q_REVISION (6, 0) void rightColumnChanged()

	Q_REVISION (6, 0) void topRowChanged()

	Q_REVISION (6, 0) void bottomRowChanged()

	Q_REVISION (6, 2) void selectionModelChanged()

	Q_REVISION (6, 4) void animateChanged()

	Q_REVISION (6, 4) void keyNavigationEnabledChanged()

	Q_REVISION (6, 4) void pointerNavigationEnabledChanged()

	Q_REVISION (6, 4) void currentRowChanged()

	Q_REVISION (6, 4) void currentColumnChanged()

	Q_REVISION (6, 4) void alternatingRowsChanged()

	Q_REVISION (6, 4) void selectionBehaviorChanged()

	Q_REVISION (6, 5) void resizableColumnsChanged()

	Q_REVISION (6, 5) void resizableRowsChanged()

	Q_REVISION (6, 5) void editTriggersChanged()

	Q_REVISION (6, 5) void layoutChanged()

	Q_REVISION (6, 6) void selectionModeChanged()

Signals inherited from QQuickFlickable
void	contentWidthChanged ()

void	contentHeightChanged ()

void	contentXChanged ()

void	contentYChanged ()

void	topMarginChanged ()

void	bottomMarginChanged ()

void	leftMarginChanged ()

void	rightMarginChanged ()

void	originYChanged ()

void	originXChanged ()

void	movingChanged ()

void	movingHorizontallyChanged ()

void	movingVerticallyChanged ()

void	flickingChanged ()

void	flickingHorizontallyChanged ()

void	flickingVerticallyChanged ()

void	draggingChanged ()

void	draggingHorizontallyChanged ()

void	draggingVerticallyChanged ()

void	horizontalVelocityChanged ()

void	verticalVelocityChanged ()

void	isAtBoundaryChanged ()

void	flickableDirectionChanged ()

void	interactiveChanged ()

void	boundsBehaviorChanged ()

	Q_REVISION (2, 10) void boundsMovementChanged()

void	reboundChanged ()

void	maximumFlickVelocityChanged ()

void	flickDecelerationChanged ()

void	pressDelayChanged ()

void	movementStarted ()

void	movementEnded ()

void	flickStarted ()

void	flickEnded ()

void	dragStarted ()

void	dragEnded ()

void	pixelAlignedChanged ()

	Q_REVISION (2, 12) void synchronousDragChanged()

	Q_REVISION (2, 9) void horizontalOvershootChanged()

	Q_REVISION (2, 9) void verticalOvershootChanged()

void	atXEndChanged ()

void	atYEndChanged ()

void	atXBeginningChanged ()

void	atYBeginningChanged ()

Signals inherited from QQuickItem
void	childrenRectChanged (const QRectF &)

void	baselineOffsetChanged (qreal)

void	stateChanged (const QString &)

void	focusChanged (bool)

void	activeFocusChanged (bool)

	Q_REVISION (2, 1) void activeFocusOnTabChanged(bool)

void	parentChanged (QQuickItem *)

void	transformOriginChanged (TransformOrigin)

void	smoothChanged (bool)

void	antialiasingChanged (bool)

void	clipChanged (bool)

	Q_REVISION (2, 1) void windowChanged(QQuickWindow *window)

void	childrenChanged ()

void	opacityChanged ()

void	enabledChanged ()

void	visibleChanged ()

void	visibleChildrenChanged ()

void	rotationChanged ()

void	scaleChanged ()

void	xChanged ()

void	yChanged ()

void	widthChanged ()

void	heightChanged ()

void	zChanged ()

void	implicitWidthChanged ()

void	implicitHeightChanged ()

	Q_REVISION (2, 11) void containmentMaskChanged()

	Q_REVISION (6, 0) void paletteChanged()

	Q_REVISION (6, 0) void paletteCreated()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickTableView (QQuickItem *parent=nullptr)

	~QQuickTableView () override

int	rows () const

int	columns () const

qreal	rowSpacing () const

void	setRowSpacing (qreal spacing)

qreal	columnSpacing () const

void	setColumnSpacing (qreal spacing)

QJSValue	rowHeightProvider () const

void	setRowHeightProvider (const QJSValue &provider)

QJSValue	columnWidthProvider () const

void	setColumnWidthProvider (const QJSValue &provider)

QVariant	model () const

void	setModel (const QVariant &newModel)

QQmlComponent *	delegate () const

void	setDelegate (QQmlComponent *)

bool	reuseItems () const

void	setReuseItems (bool reuseItems)

void	setContentWidth (qreal width)

void	setContentHeight (qreal height)

QQuickTableView *	syncView () const
	\qmlproperty TableView QtQuick::TableView::syncView

void	setSyncView (QQuickTableView *view)

Qt::Orientations	syncDirection () const
	\qmlproperty Qt::Orientations QtQuick::TableView::syncDirection

void	setSyncDirection (Qt::Orientations direction)

QItemSelectionModel *	selectionModel () const

void	setSelectionModel (QItemSelectionModel *selectionModel)

bool	animate () const

void	setAnimate (bool animate)

bool	keyNavigationEnabled () const

void	setKeyNavigationEnabled (bool enabled)

bool	pointerNavigationEnabled () const

void	setPointerNavigationEnabled (bool enabled)

int	leftColumn () const

int	rightColumn () const

int	topRow () const

int	bottomRow () const

int	currentRow () const

int	currentColumn () const

bool	alternatingRows () const

void	setAlternatingRows (bool alternatingRows)

SelectionBehavior	selectionBehavior () const

void	setSelectionBehavior (SelectionBehavior selectionBehavior)

SelectionMode	selectionMode () const

void	setSelectionMode (SelectionMode selectionMode)

bool	resizableColumns () const

void	setResizableColumns (bool enabled)

bool	resizableRows () const

void	setResizableRows (bool enabled)

EditTriggers	editTriggers () const

void	setEditTriggers (EditTriggers editTriggers)

Q_INVOKABLE void	forceLayout ()

Q_INVOKABLE void	positionViewAtCell (const QPoint &cell, PositionMode mode, const QPointF &offset=QPointF(), const QRectF &subRect=QRectF())

Q_INVOKABLE void	positionViewAtIndex (const QModelIndex &index, PositionMode mode, const QPointF &offset=QPointF(), const QRectF &subRect=QRectF())

Q_INVOKABLE void	positionViewAtRow (int row, PositionMode mode, qreal offset=0, const QRectF &subRect=QRectF())

Q_INVOKABLE void	positionViewAtColumn (int column, PositionMode mode, qreal offset=0, const QRectF &subRect=QRectF())

Q_INVOKABLE QQuickItem *	itemAtCell (const QPoint &cell) const

	Q_REVISION (6, 4) Q_INVOKABLE QPoint cellAtPosition(const QPointF &position

	Q_REVISION (6, 4) Q_INVOKABLE QPoint cellAtPosition(qreal x

	Q_REVISION (6, 2) Q_INVOKABLE bool isColumnLoaded(int column) const

	Q_REVISION (6, 2) Q_INVOKABLE bool isRowLoaded(int row) const

	Q_REVISION (6, 2) Q_INVOKABLE qreal columnWidth(int column) const

	Q_REVISION (6, 2) Q_INVOKABLE qreal rowHeight(int row) const

	Q_REVISION (6, 2) Q_INVOKABLE qreal implicitColumnWidth(int column) const

	Q_REVISION (6, 2) Q_INVOKABLE qreal implicitRowHeight(int row) const

	Q_REVISION (6, 4) Q_INVOKABLE QModelIndex index(int row

	Q_REVISION (6, 4) Q_INVOKABLE virtual QModelIndex modelIndex(const QPoint &cell) const

	Q_REVISION (6, 4) Q_INVOKABLE virtual QPoint cellAtIndex(const QModelIndex &index) const

	Q_REVISION (6, 4) Q_INVOKABLE int rowAtIndex(const QModelIndex &index) const

	Q_REVISION (6, 4) Q_INVOKABLE int columnAtIndex(const QModelIndex &index) const

	Q_REVISION (6, 5) Q_INVOKABLE void setColumnWidth(int column

	Q_REVISION (6, 5) Q_INVOKABLE void clearColumnWidths()

	Q_REVISION (6, 5) Q_INVOKABLE qreal explicitColumnWidth(int column) const

	Q_REVISION (6, 5) Q_INVOKABLE void setRowHeight(int row

	Q_REVISION (6, 5) Q_INVOKABLE void clearRowHeights()

	Q_REVISION (6, 5) Q_INVOKABLE qreal explicitRowHeight(int row) const

	Q_REVISION (6, 5) Q_INVOKABLE void edit(const QModelIndex &index)

	Q_REVISION (6, 5) Q_INVOKABLE void closeEditor()

	Q_REVISION (6, 5) Q_INVOKABLE QQuickItem *itemAtIndex(const QModelIndex &index) const

Public Member Functions inherited from QQuickFlickable
	QQuickFlickable (QQuickItem *parent=nullptr)
	\qmlsignal QtQuick::Flickable::dragStarted()

	~QQuickFlickable () override

QQmlListProperty< QObject >	flickableData ()

QQmlListProperty< QQuickItem >	flickableChildren ()

BoundsBehavior	boundsBehavior () const
	\qmlproperty enumeration QtQuick::Flickable::boundsBehavior This property holds whether the surface may be dragged beyond the Flickable's boundaries, or overshoot the Flickable's boundaries when flicked.

void	setBoundsBehavior (BoundsBehavior)

BoundsMovement	boundsMovement () const
	\qmlproperty enumeration QtQuick::Flickable::boundsMovement

void	setBoundsMovement (BoundsMovement movement)

QQuickTransition *	rebound () const
	\qmlproperty Transition QtQuick::Flickable::rebound

void	setRebound (QQuickTransition *transition)

qreal	contentWidth () const
	\qmlproperty real QtQuick::Flickable::contentWidth \qmlproperty real QtQuick::Flickable::contentHeight

void	setContentWidth (qreal)

qreal	contentHeight () const

void	setContentHeight (qreal)

qreal	contentX () const
	\qmlproperty real QtQuick::Flickable::contentX \qmlproperty real QtQuick::Flickable::contentY

virtual void	setContentX (qreal pos)

qreal	contentY () const

virtual void	setContentY (qreal pos)

qreal	topMargin () const
	\qmlproperty real QtQuick::Flickable::topMargin \qmlproperty real QtQuick::Flickable::leftMargin \qmlproperty real QtQuick::Flickable::bottomMargin \qmlproperty real QtQuick::Flickable::rightMargin

void	setTopMargin (qreal m)

qreal	bottomMargin () const

void	setBottomMargin (qreal m)

qreal	leftMargin () const

void	setLeftMargin (qreal m)

qreal	rightMargin () const

void	setRightMargin (qreal m)

virtual qreal	originY () const
	\qmlproperty real QtQuick::Flickable::originX \qmlproperty real QtQuick::Flickable::originY

virtual qreal	originX () const

bool	isMoving () const
	\qmlproperty bool QtQuick::Flickable::moving \qmlproperty bool QtQuick::Flickable::movingHorizontally \qmlproperty bool QtQuick::Flickable::movingVertically

bool	isMovingHorizontally () const

bool	isMovingVertically () const

bool	isFlicking () const

bool	isFlickingHorizontally () const
	\qmlproperty bool QtQuick::Flickable::flicking \qmlproperty bool QtQuick::Flickable::flickingHorizontally \qmlproperty bool QtQuick::Flickable::flickingVertically

bool	isFlickingVertically () const

bool	isDragging () const
	\qmlproperty bool QtQuick::Flickable::dragging \qmlproperty bool QtQuick::Flickable::draggingHorizontally \qmlproperty bool QtQuick::Flickable::draggingVertically

bool	isDraggingHorizontally () const

bool	isDraggingVertically () const

int	pressDelay () const
	\qmlproperty int QtQuick::Flickable::pressDelay

void	setPressDelay (int delay)

qreal	maximumFlickVelocity () const
	\qmlproperty real QtQuick::Flickable::maximumFlickVelocity This property holds the maximum velocity that the user can flick the view in pixels/second.

void	setMaximumFlickVelocity (qreal)

qreal	flickDeceleration () const
	\qmlproperty real QtQuick::Flickable::flickDeceleration This property holds the rate at which a flick will decelerate: the higher the number, the faster it slows down when the user stops flicking via touch.

void	setFlickDeceleration (qreal)

bool	isInteractive () const
	\qmlproperty bool QtQuick::Flickable::interactive

void	setInteractive (bool)

qreal	horizontalVelocity () const
	\qmlproperty real QtQuick::Flickable::horizontalVelocity \qmlproperty real QtQuick::Flickable::verticalVelocity

qreal	verticalVelocity () const

bool	isAtXEnd () const
	\qmlproperty bool QtQuick::Flickable::atXBeginning \qmlproperty bool QtQuick::Flickable::atXEnd \qmlproperty bool QtQuick::Flickable::atYBeginning \qmlproperty bool QtQuick::Flickable::atYEnd

bool	isAtXBeginning () const

bool	isAtYEnd () const

bool	isAtYBeginning () const

QQuickItem *	contentItem () const
	\qmlproperty Item QtQuick::Flickable::contentItem

FlickableDirection	flickableDirection () const
	\qmlproperty enumeration QtQuick::Flickable::flickableDirection

void	setFlickableDirection (FlickableDirection)

bool	pixelAligned () const
	\qmlproperty bool QtQuick::Flickable::pixelAligned

void	setPixelAligned (bool align)

bool	synchronousDrag () const
	\qmlproperty bool QtQuick::Flickable::synchronousDrag

void	setSynchronousDrag (bool v)

qreal	horizontalOvershoot () const
	\qmlproperty real QtQuick::Flickable::horizontalOvershoot

qreal	verticalOvershoot () const
	\qmlproperty real QtQuick::Flickable::verticalOvershoot

Q_INVOKABLE void	resizeContent (qreal w, qreal h, QPointF center)
	\qmlmethod QtQuick::Flickable::resizeContent(real width, real height, QPointF center)

Q_INVOKABLE void	returnToBounds ()
	\qmlmethod QtQuick::Flickable::returnToBounds()

Q_INVOKABLE void	flick (qreal xVelocity, qreal yVelocity)
	\qmlmethod QtQuick::Flickable::flick(qreal xVelocity, qreal yVelocity)

Q_INVOKABLE void	cancelFlick ()
	\qmlmethod QtQuick::Flickable::cancelFlick()

Public Member Functions inherited from QQuickItem
	QQuickItem (QQuickItem *parent=nullptr)
	Constructs a QQuickItem with the given parent.

	~QQuickItem () override
	Destroys the QQuickItem.

QQuickWindow *	window () const
	Returns the window in which this item is rendered.

QQuickItem *	parentItem () const

void	setParentItem (QQuickItem *parent)

void	stackBefore (const QQuickItem *)
	Moves the specified sibling item to the index before this item within the list of children.

void	stackAfter (const QQuickItem *)
	Moves the specified sibling item to the index after this item within the list of children.

QRectF	childrenRect ()
	\qmlpropertygroup QtQuick::Item::childrenRect \qmlproperty real QtQuick::Item::childrenRect.x \qmlproperty real QtQuick::Item::childrenRect.y \qmlproperty real QtQuick::Item::childrenRect.width \qmlproperty real QtQuick::Item::childrenRect.height \readonly

QList< QQuickItem * >	childItems () const
	Returns the children of this item.

bool	clip () const
	\qmlproperty bool QtQuick::Item::clip This property holds whether clipping is enabled.

void	setClip (bool)

QString	state () const
	\qmlproperty string QtQuick::Item::state

void	setState (const QString &)

qreal	baselineOffset () const
	\qmlproperty int QtQuick::Item::baselineOffset

void	setBaselineOffset (qreal)

QQmlListProperty< QQuickTransform >	transform ()

qreal	x () const

qreal	y () const

QPointF	position () const

void	setX (qreal)

void	setY (qreal)

void	setPosition (const QPointF &)

QBindable< qreal >	bindableX ()

QBindable< qreal >	bindableY ()

qreal	width () const

void	setWidth (qreal)

void	resetWidth ()

void	setImplicitWidth (qreal)

qreal	implicitWidth () const
	Returns the width of the item that is implied by other properties that determine the content.

QBindable< qreal >	bindableWidth ()

qreal	height () const

void	setHeight (qreal)

void	resetHeight ()

void	setImplicitHeight (qreal)

qreal	implicitHeight () const

QBindable< qreal >	bindableHeight ()

QSizeF	size () const

void	setSize (const QSizeF &size)

TransformOrigin	transformOrigin () const

void	setTransformOrigin (TransformOrigin)

QPointF	transformOriginPoint () const

void	setTransformOriginPoint (const QPointF &)

qreal	z () const

void	setZ (qreal)

qreal	rotation () const

void	setRotation (qreal)

qreal	scale () const

void	setScale (qreal)

qreal	opacity () const

void	setOpacity (qreal)

bool	isVisible () const

void	setVisible (bool)

bool	isEnabled () const

void	setEnabled (bool)

bool	smooth () const

void	setSmooth (bool)

bool	activeFocusOnTab () const
	\qmlproperty bool QtQuick::Item::activeFocusOnTab

void	setActiveFocusOnTab (bool)

bool	antialiasing () const

void	setAntialiasing (bool)

void	resetAntialiasing ()

Flags	flags () const
	Returns the item flags for this item.

void	setFlag (Flag flag, bool enabled=true)
	Enables the specified flag for this item if enabled is true; if enabled is false, the flag is disabled.

void	setFlags (Flags flags)
	Enables the specified flags for this item.

virtual QRectF	boundingRect () const
	Returns the extents of the item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

virtual QRectF	clipRect () const
	Returns the rectangular area within this item that is currently visible in \l viewportItem(), if there is a viewport and the \l ItemObservesViewport flag is set; otherwise, the extents of this item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

QQuickItem *	viewportItem () const
	If the \l ItemObservesViewport flag is set, returns the nearest parent with the \l ItemIsViewport flag.

bool	hasActiveFocus () const

bool	hasFocus () const

void	setFocus (bool)

void	setFocus (bool focus, Qt::FocusReason reason)

bool	isFocusScope () const
	Returns true if this item is a focus scope, and false otherwise.

QQuickItem *	scopedFocusItem () const
	If this item is a focus scope, this returns the item in its focus chain that currently has focus.

bool	isAncestorOf (const QQuickItem *child) const
	Returns `true` if this item is an ancestor of child (i.e., if this item is child's parent, or one of child's parent's ancestors).

Qt::MouseButtons	acceptedMouseButtons () const
	Returns the mouse buttons accepted by this item.

void	setAcceptedMouseButtons (Qt::MouseButtons buttons)
	Sets the mouse buttons accepted by this item to buttons.

bool	acceptHoverEvents () const
	Returns whether hover events are accepted by this item.

void	setAcceptHoverEvents (bool enabled)
	If enabled is true, this sets the item to accept hover events; otherwise, hover events are not accepted by this item.

bool	acceptTouchEvents () const
	Returns whether touch events are accepted by this item.

void	setAcceptTouchEvents (bool accept)
	If enabled is true, this sets the item to accept touch events; otherwise, touch events are not accepted by this item.

bool	isUnderMouse () const

void	grabMouse ()

void	ungrabMouse ()

bool	keepMouseGrab () const
	Returns whether mouse input should exclusively remain with this item.

void	setKeepMouseGrab (bool)
	Sets whether the mouse input should remain exclusively with this item.

bool	filtersChildMouseEvents () const
	Returns whether pointer events intended for this item's children should be filtered through this item.

void	setFiltersChildMouseEvents (bool filter)
	Sets whether pointer events intended for this item's children should be filtered through this item.

void	grabTouchPoints (const QList< int > &ids)

void	ungrabTouchPoints ()

bool	keepTouchGrab () const
	Returns whether the touch points grabbed by this item should exclusively remain with this item.

void	setKeepTouchGrab (bool)
	Sets whether the touch points grabbed by this item should remain exclusively with this item.

	Q_REVISION (2, 4) Q_INVOKABLE bool grabToImage(const QJSValue &callback

QSharedPointer< QQuickItemGrabResult >	grabToImage (const QSize &targetSize=QSize())
	Grabs the item into an in-memory image.

virtual Q_INVOKABLE bool	contains (const QPointF &point) const
	\qmlmethod bool QtQuick::Item::contains(point point)

QObject *	containmentMask () const

void	setContainmentMask (QObject *mask)

QTransform	itemTransform (QQuickItem , bool ) const
	\qmlmethod point QtQuick::Item::mapFromItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapFromItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, rect r)

QPointF	mapToScene (const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within the scene's coordinate system, and returns the mapped coordinate.

QRectF	mapRectToItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectToScene (const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within the scene's coordinate system, and returns the mapped rectangle value.

QPointF	mapFromScene (const QPointF &point) const
	Maps the given point in the scene's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

QRectF	mapRectFromItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in item's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectFromScene (const QRectF &rect) const
	Maps the given rect in the scene's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

void	polish ()
	Schedules a polish event for this item.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in item's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(const QPointF &point) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(const QPointF &point) const

Q_INVOKABLE void	forceActiveFocus ()
	\qmlmethod point QtQuick::Item::mapToItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapToItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapToItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapToItem(Item item, rect r)

Q_INVOKABLE void	forceActiveFocus (Qt::FocusReason reason)
	\qmlmethod QtQuick::Item::forceActiveFocus(Qt::FocusReason reason) This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Forces active focus on the item with the given reason.

	Q_REVISION (2, 1) Q_INVOKABLE QQuickItem *nextItemInFocusChain(bool forward

Q_INVOKABLE QQuickItem *	childAt (qreal x, qreal y) const
	\qmlmethod QtQuick::Item::childAt(real x, real y)

	Q_REVISION (6, 3) Q_INVOKABLE void ensurePolished()

	Q_REVISION (6, 3) Q_INVOKABLE void dumpItemTree() const

virtual bool	isTextureProvider () const
	Returns true if this item is a texture provider.

virtual QSGTextureProvider *	textureProvider () const
	Returns the texture provider for an item.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

void	moveToThread (QThread *thread)
	Changes the thread affinity for this object and its children.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

template<typename T >
T	findChild (const QString &aName=QString(), Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (const QString &aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

virtual void	classBegin ()=0
	Invoked after class creation, but before any properties have been set.

virtual void	componentComplete ()=0
	Invoked after the root component that caused this instantiation has completed construction.

Public Member Functions inherited from QQmlFinalizerHook
virtual	~QQmlFinalizerHook ()

virtual void	componentFinalized ()=0
	The customization point provided by this interface.

Static Public Member Functions
static QQuickTableViewAttached *	qmlAttachedProperties (QObject *)

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Public Attributes
bool	includeSpacing = false) const

qreal	y

qreal bool	includeSpacing = false) const

int column	const

qreal	size

Public Attributes inherited from QQuickItem
const QSize &	targetSize = QSize())

qreal y	const

Protected Member Functions
void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override

void	viewportMoved (Qt::Orientations orientation) override

void	keyPressEvent (QKeyEvent *e) override
	This event handler can be reimplemented in a subclass to receive key press events for an item.

bool	eventFilter (QObject obj, QEvent event) override
	Filters events if this object has been installed as an event filter for the watched object.

	QQuickTableView (QQuickTableViewPrivate &dd, QQuickItem *parent)

void	componentFinalized () override
	The customization point provided by this interface.

Protected Member Functions inherited from QQuickFlickable
bool	childMouseEventFilter (QQuickItem , QEvent ) override

void	mousePressEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.

void	mouseMoveEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.

void	mouseReleaseEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.

void	touchEvent (QTouchEvent *event) override
	This event handler can be reimplemented in a subclass to receive touch events for an item.

void	timerEvent (QTimerEvent *event) override
	This event handler can be reimplemented in a subclass to receive timer events for the object.

QQuickFlickableVisibleArea *	visibleArea ()

virtual qreal	minXExtent () const

virtual qreal	minYExtent () const

virtual qreal	maxXExtent () const

virtual qreal	maxYExtent () const

qreal	vWidth () const

qreal	vHeight () const

void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.

virtual void	viewportMoved (Qt::Orientations orient)

void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override

void	mouseUngrabEvent () override
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.

bool	filterPointerEvent (QQuickItem receiver, QPointerEvent event)

bool	xflick () const

bool	yflick () const

	QQuickFlickable (QQuickFlickablePrivate &dd, QQuickItem *parent)

Protected Member Functions inherited from QQuickItem
bool	event (QEvent *) override
	\reimp

bool	isComponentComplete () const
	Returns true if construction of the QML component is complete; otherwise returns false.

virtual void	itemChange (ItemChange, const ItemChangeData &)
	Called when change occurs for this item.

virtual void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry)

bool	widthValid () const
	Returns whether the width property has been set explicitly.

bool	heightValid () const
	Returns whether the height property has been set explicitly.

void	setImplicitSize (qreal, qreal)

void	classBegin () override
	\reimp Derived classes should call the base class method before adding their own action to perform at classBegin.

void	componentComplete () override
	\reimp Derived classes should call the base class method before adding their own actions to perform at componentComplete.

virtual void	keyPressEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key press events for an item.

virtual void	keyReleaseEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key release events for an item.

virtual void	focusInEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-in events for an item.

virtual void	focusOutEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-out events for an item.

virtual void	mousePressEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.

virtual void	mouseMoveEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.

virtual void	mouseReleaseEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.

virtual void	mouseDoubleClickEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse double-click events for an item.

virtual void	mouseUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.

virtual void	touchUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a touch ungrab event has occurred on this item.

virtual void	touchEvent (QTouchEvent *event)
	This event handler can be reimplemented in a subclass to receive touch events for an item.

virtual void	hoverEnterEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-enter events for an item.

virtual void	hoverMoveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-move events for an item.

virtual void	hoverLeaveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-leave events for an item.

virtual bool	childMouseEventFilter (QQuickItem , QEvent )
	Reimplement this method to filter the pointer events that are received by this item's children.

virtual QSGNode *	updatePaintNode (QSGNode , UpdatePaintNodeData )
	Called on the render thread when it is time to sync the state of the item with the scene graph.

virtual void	releaseResources ()
	This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().

virtual void	updatePolish ()
	This function should perform any layout as required for this item.

	QQuickItem (QQuickItemPrivate &dd, QQuickItem *parent=nullptr)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
int	rows

int	columns

qreal	rowSpacing

qreal	columnSpacing

QJSValue	rowHeightProvider

QJSValue	columnWidthProvider

QVariant	model

QQmlComponent *	delegate

bool	reuseItems

qreal	contentWidth

qreal	contentHeight

QQuickTableView *	syncView

FINALQt::Orientations	syncDirection

FINALint	leftColumn

FINALint	rightColumn

FINALint	topRow

FINALint	bottomRow

FINALQItemSelectionModel *	selectionModel

FINALbool	animate

FINALbool	keyNavigationEnabled

FINALbool	pointerNavigationEnabled

FINALint	currentRow

FINALint	currentColumn

FINALbool	alternatingRows

FINALSelectionBehavior	selectionBehavior

FINALbool	resizableColumns

FINALbool	resizableRows

FINALEditTriggers	editTriggers

FINALSelectionMode	selectionMode

Properties inherited from QQuickFlickable
qreal	contentWidth

qreal	contentHeight

qreal	contentX

qreal	contentY

QQuickItem *	contentItem

qreal	topMargin

qreal	bottomMargin

qreal	originY

qreal	leftMargin

qreal	rightMargin

qreal	originX

qreal	horizontalVelocity

qreal	verticalVelocity

BoundsBehavior	boundsBehavior

BoundsMovement	boundsMovement

FINALQQuickTransition *	rebound

qreal	maximumFlickVelocity

qreal	flickDeceleration

bool	moving

bool	movingHorizontally

bool	movingVertically

bool	flicking

bool	flickingHorizontally

bool	flickingVertically

bool	dragging

bool	draggingHorizontally

bool	draggingVertically

FlickableDirection	flickableDirection

bool	interactive

int	pressDelay

bool	atXEnd

bool	atYEnd

bool	atXBeginning

bool	atYBeginning

QQuickFlickableVisibleArea *	visibleArea

bool	pixelAligned

bool	synchronousDrag

FINALqreal	horizontalOvershoot

FINALqreal	verticalOvershoot

FINALQQmlListProperty< QObject >	flickableData

QQmlListProperty< QQuickItem >	flickableChildren

Properties inherited from QQuickItem
QQuickItem *	parent
	\qmlproperty Item QtQuick::Item::parent This property holds the visual parent of the item.

qreal	x
	\qmlproperty real QtQuick::Item::x \qmlproperty real QtQuick::Item::y \qmlproperty real QtQuick::Item::width \qmlproperty real QtQuick::Item::height

qreal	y
	Defines the item's y position relative to its parent.

qreal	z
	\qmlproperty real QtQuick::Item::z

qreal	width
	This property holds the width of this item.

qreal	height
	This property holds the height of this item.

qreal	opacity
	\qmlproperty real QtQuick::Item::opacity

bool	enabled
	\qmlproperty bool QtQuick::Item::enabled

bool	visible
	\qmlproperty bool QtQuick::Item::visible

qreal	rotation
	\qmlproperty real QtQuick::Item::rotation This property holds the rotation of the item in degrees clockwise around its transformOrigin.

qreal	scale
	\qmlproperty real QtQuick::Item::scale This property holds the scale factor for this item.

TransformOrigin	transformOrigin
	\qmlproperty enumeration QtQuick::Item::transformOrigin This property holds the origin point around which scale and rotation transform.

QPointF	transformOriginPoint

QQmlListProperty< QQuickTransform >	transform
	\qmlproperty list<Transform> QtQuick::Item::transform This property holds the list of transformations to apply.

bool	smooth
	\qmlproperty bool QtQuick::Item::smooth

bool	antialiasing
	\qmlproperty bool QtQuick::Item::antialiasing

qreal	implicitWidth

qreal	implicitHeight

QObject *	containmentMask
	\qmlproperty QObject* QtQuick::Item::containmentMask

Properties inherited from QObject
QString	objectName
	the name of this object

Private Member Functions
qreal	minXExtent () const override

qreal	maxXExtent () const override

qreal	minYExtent () const override

qreal	maxYExtent () const override

Additional Inherited Members
Public Slots inherited from QQuickItem
void	update ()
	Schedules a call to updatePaintNode() for this item.

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Protected Slots inherited from QQuickFlickable
void	movementStarting ()

void	movementEnding ()

void	movementEnding (bool hMovementEnding, bool vMovementEnding)

void	velocityTimelineCompleted ()

void	timelineCompleted ()

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 34 of file qquicktableview_p.h.

Member Enumeration Documentation

◆ EditTrigger

enum QQuickTableView::EditTrigger

Enumerator
NoEditTriggers
SingleTapped
DoubleTapped
SelectedTapped
EditKeyPressed
AnyKeyPressed

Definition at line 103 of file qquicktableview_p.h.

◆ PositionModeFlag

enum QQuickTableView::PositionModeFlag

Enumerator
AlignLeft
AlignRight
AlignHCenter
AlignTop
AlignBottom
AlignVCenter
AlignCenter
Visible
Contain

Definition at line 74 of file qquicktableview_p.h.

◆ SelectionBehavior

enum QQuickTableView::SelectionBehavior

Enumerator
SelectionDisabled
SelectCells
SelectRows
SelectColumns

Definition at line 88 of file qquicktableview_p.h.

◆ SelectionMode

enum QQuickTableView::SelectionMode

Enumerator
SingleSelection
ContiguousSelection
ExtendedSelection

Definition at line 96 of file qquicktableview_p.h.

Constructor & Destructor Documentation

◆ QQuickTableView() [1/2]

QQuickTableView::QQuickTableView ( QQuickItem * parent = nullptr )

Definition at line 5278 of file qquicktableview.cpp.

◆ ~QQuickTableView()

QQuickTableView::~QQuickTableView ( )

override

Definition at line 5290 of file qquicktableview.cpp.

◆ QQuickTableView() [2/2]

QQuickTableView::QQuickTableView	(	QQuickTableViewPrivate &	dd,
		QQuickItem *	parent
	)

protected

Definition at line 5284 of file qquicktableview.cpp.

Member Function Documentation

◆ alternatingRows()

bool QQuickTableView::alternatingRows ( ) const

Definition at line 6447 of file qquicktableview.cpp.

◆ animate()

bool QQuickTableView::animate ( ) const

Definition at line 5607 of file qquicktableview.cpp.

◆ bottomRow()

int QQuickTableView::bottomRow ( ) const

Definition at line 5677 of file qquicktableview.cpp.

References d.

◆ columns()

int QQuickTableView::columns ( ) const

Definition at line 5338 of file qquicktableview.cpp.

◆ columnsChanged

void QQuickTableView::columnsChanged ( )

signal

◆ columnSpacing()

qreal QQuickTableView::columnSpacing ( ) const

Definition at line 5362 of file qquicktableview.cpp.

◆ columnSpacingChanged

void QQuickTableView::columnSpacingChanged ( )

signal

Referenced by setColumnSpacing().

Here is the caller graph for this function:

◆ columnWidthProvider()

QJSValue QQuickTableView::columnWidthProvider ( ) const

Definition at line 5398 of file qquicktableview.cpp.

◆ columnWidthProviderChanged

void QQuickTableView::columnWidthProviderChanged ( )

signal

Referenced by setColumnWidthProvider().

Here is the caller graph for this function:

◆ componentFinalized()

void QQuickTableView::componentFinalized ( )

overrideprotectedvirtual

The customization point provided by this interface.

See the class description for why it is useful and how it compares to componentComplete.

See also: QQmlParserStatus::componentComplete

Implements QQmlFinalizerHook.

Definition at line 5294 of file qquicktableview.cpp.

References d, and qCDebug.

◆ currentColumn()

int QQuickTableView::currentColumn ( ) const

Definition at line 5688 of file qquicktableview.cpp.

◆ currentRow()

int QQuickTableView::currentRow ( ) const

Definition at line 5683 of file qquicktableview.cpp.

◆ delegate()

QQmlComponent * QQuickTableView::delegate ( ) const

Definition at line 5431 of file qquicktableview.cpp.

◆ delegateChanged

void QQuickTableView::delegateChanged ( )

signal

Referenced by setDelegate().

Here is the caller graph for this function:

◆ editTriggers()

QQuickTableView::EditTriggers QQuickTableView::editTriggers ( ) const

Definition at line 5448 of file qquicktableview.cpp.

◆ eventFilter()

bool QQuickTableView::eventFilter	(	QObject *	watched,
		QEvent *	event
	)

overrideprotectedvirtual

Filters events if this object has been installed as an event filter for the watched object.

In your reimplementation of this function, if you want to filter the event out, i.e. stop it being handled further, return true; otherwise return false.

Example:

class MainWindow : public QMainWindow
{
public:
    MainWindow();
 
protected:
    bool eventFilter(QObject *obj, QEvent *ev) override;
 
private:
    QTextEdit *textEdit;
};
 
MainWindow::MainWindow()
{
    textEdit = new QTextEdit;
    setCentralWidget(textEdit);
 
    textEdit->installEventFilter(this);
}
 
bool MainWindow::eventFilter(QObject *obj, QEvent *event)
{
    if (obj == textEdit) {
        if (event->type() == QEvent::KeyPress) {
            QKeyEvent *keyEvent = static_cast<QKeyEvent*>(event);
            qDebug() << "Ate key press" << keyEvent->key();
            return true;
        } else {
            return false;
        }
    } else {
        // pass the event on to the parent class
        return QMainWindow::eventFilter(obj, event);
    }
}

Notice in the example above that unhandled events are passed to the base class's eventFilter() function, since the base class might have reimplemented eventFilter() for its own internal purposes.

Some events, such as \l QEvent::ShortcutOverride must be explicitly accepted (by calling \l {QEvent::}{accept()} on them) in order to prevent propagation.

Warning: If you delete the receiver object in this function, be sure to return true. Otherwise, Qt will forward the event to the deleted object and the program might crash.

See also: installEventFilter()

Reimplemented from QObject.

Definition at line 6410 of file qquicktableview.cpp.

References QQuickItem::activeFocusOnTab(), d, edit, emit, QObject::eventFilter(), QKeyEvent::key(), Qt::Key_Backtab, Qt::Key_Enter, Qt::Key_Escape, Qt::Key_Return, Qt::Key_Tab, QEvent::KeyPress, and Q_ASSERT.

Here is the call graph for this function:

◆ forceLayout()

void QQuickTableView::forceLayout ( )

Definition at line 6203 of file qquicktableview.cpp.

◆ geometryChange()

void QQuickTableView::geometryChange	(	const QRectF &	newGeometry,
		const QRectF &	oldGeometry
	)

overrideprotectedvirtual

Since: 6.0

This function is called to handle this item's changes in geometry from oldGeometry to newGeometry. If the two geometries are the same, it doesn't do anything.

Derived classes must call the base class method within their implementation.

Reimplemented from QQuickFlickable.

Definition at line 6328 of file qquicktableview.cpp.

References d, and QQuickFlickable::geometryChange().

Here is the call graph for this function:

◆ itemAtCell()

QQuickItem * QQuickTableView::itemAtCell ( const QPoint & cell ) const

Definition at line 5872 of file qquicktableview.cpp.

References d.

Referenced by QQuickTreeView::collapse().

Here is the caller graph for this function:

◆ keyNavigationEnabled()

bool QQuickTableView::keyNavigationEnabled ( ) const

Definition at line 5627 of file qquicktableview.cpp.

◆ keyPressEvent()

void QQuickTableView::keyPressEvent ( QKeyEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive key press events for an item.

The event information is provided by the event parameter.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Reimplemented in QQuickTreeView.

Definition at line 6383 of file qquicktableview.cpp.

References d, e, and QQuickItem::keyPressEvent().

Referenced by QQuickTreeView::keyPressEvent().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ leftColumn()

int QQuickTableView::leftColumn ( ) const

Definition at line 5659 of file qquicktableview.cpp.

References d.

◆ maxXExtent()

qreal QQuickTableView::maxXExtent ( ) const

overrideprivatevirtual

Reimplemented from QQuickFlickable.

Definition at line 5318 of file qquicktableview.cpp.

References QQuickFlickable::maxXExtent().

Here is the call graph for this function:

◆ maxYExtent()

qreal QQuickTableView::maxYExtent ( ) const

overrideprivatevirtual

Reimplemented from QQuickFlickable.

Definition at line 5328 of file qquicktableview.cpp.

References QQuickFlickable::maxYExtent().

Here is the call graph for this function:

◆ minXExtent()

qreal QQuickTableView::minXExtent ( ) const

overrideprivatevirtual

Reimplemented from QQuickFlickable.

Definition at line 5313 of file qquicktableview.cpp.

References QQuickFlickable::minXExtent().

Here is the call graph for this function:

◆ minYExtent()

qreal QQuickTableView::minYExtent ( ) const

overrideprivatevirtual

Reimplemented from QQuickFlickable.

Definition at line 5323 of file qquicktableview.cpp.

References QQuickFlickable::minYExtent().

Here is the call graph for this function:

◆ model()

QVariant QQuickTableView::model ( ) const

Definition at line 5415 of file qquicktableview.cpp.

◆ modelChanged

void QQuickTableView::modelChanged ( )

signal

◆ pointerNavigationEnabled()

bool QQuickTableView::pointerNavigationEnabled ( ) const

Definition at line 5643 of file qquicktableview.cpp.

◆ positionViewAtCell()

void QQuickTableView::positionViewAtCell	(	const QPoint &	cell,
		PositionMode	mode,
		const QPointF &	offset = `QPointF()`,
		const QRectF &	subRect = `QRectF()`
	)

Definition at line 5825 of file qquicktableview.cpp.

References AlignBottom, AlignHCenter, AlignLeft, AlignRight, AlignTop, AlignVCenter, positionViewAtColumn(), positionViewAtRow(), qmlWarning(), QPoint::x(), and QPoint::y().

Referenced by QQuickTreeView::resetRootIndex(), and QQuickTreeView::setRootIndex().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ positionViewAtColumn()

void QQuickTableView::positionViewAtColumn	(	int	column,
		PositionMode	mode,
		qreal	offset = `0`,
		const QRectF &	subRect = `QRectF()`
	)

Definition at line 5759 of file qquicktableview.cpp.

References AlignHCenter, Qt::AlignLeft, AlignLeft, Qt::AlignRight, AlignRight, columns, Contain, d, QRectF::isValid(), QRectF::left(), leftColumn, qmlWarning(), QRectF::right(), rightColumn, and Visible.

Referenced by positionViewAtCell(), QQuickTableViewPrivate::positionViewAtColumn(), and positionViewAtIndex().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ positionViewAtIndex()

void QQuickTableView::positionViewAtIndex	(	const QModelIndex &	index,
		PositionMode	mode,
		const QPointF &	offset = `QPointF()`,
		const QRectF &	subRect = `QRectF()`
	)

Definition at line 5840 of file qquicktableview.cpp.

References AlignBottom, AlignHCenter, AlignLeft, AlignRight, AlignTop, AlignVCenter, positionViewAtColumn(), positionViewAtRow(), and qmlWarning().

Here is the call graph for this function:

◆ positionViewAtRow()

void QQuickTableView::positionViewAtRow	(	int	row,
		PositionMode	mode,
		qreal	offset = `0`,
		const QRectF &	subRect = `QRectF()`
	)

Definition at line 5693 of file qquicktableview.cpp.

References Qt::AlignBottom, AlignBottom, Qt::AlignTop, AlignTop, AlignVCenter, QRectF::bottom(), bottomRow, Contain, d, QRectF::isValid(), qmlWarning(), rows, QRectF::top(), topRow, and Visible.

Referenced by positionViewAtCell(), positionViewAtIndex(), and QQuickTableViewPrivate::positionViewAtRow().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ Q_REVISION [1/41]

QQuickTableView::Q_REVISION	(	2	,
		14
	)

signal

◆ Q_REVISION [2/41]

QQuickTableView::Q_REVISION	(	2	,
		14
	)

signal

◆ Q_REVISION [3/41]

QQuickTableView::Q_REVISION	(	6	,
		0
	)

signal

◆ Q_REVISION [4/41]

QQuickTableView::Q_REVISION	(	6	,
		0
	)

signal

◆ Q_REVISION [5/41]

QQuickTableView::Q_REVISION	(	6	,
		0
	)

signal

◆ Q_REVISION [6/41]

QQuickTableView::Q_REVISION	(	6	,
		0
	)

signal

◆ Q_REVISION() [7/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION() [8/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION() [9/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION() [10/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION() [11/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION() [12/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)		const

◆ Q_REVISION [13/41]

QQuickTableView::Q_REVISION	(	6	,
		2
	)

signal

◆ Q_REVISION() [14/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [15/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [16/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [17/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [18/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [19/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [20/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION [21/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [22/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [23/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [24/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [25/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [26/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION [27/41]

QQuickTableView::Q_REVISION	(	6	,
		4
	)

signal

◆ Q_REVISION() [28/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)		const &

◆ Q_REVISION() [29/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)		const

◆ Q_REVISION() [30/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)		const

◆ Q_REVISION() [31/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

◆ Q_REVISION() [32/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

◆ Q_REVISION() [33/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

◆ Q_REVISION() [34/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)		const &

◆ Q_REVISION() [35/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

◆ Q_REVISION() [36/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

◆ Q_REVISION [37/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

signal

◆ Q_REVISION [38/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

signal

◆ Q_REVISION [39/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

signal

◆ Q_REVISION [40/41]

QQuickTableView::Q_REVISION	(	6	,
		5
	)

signal

◆ Q_REVISION [41/41]

QQuickTableView::Q_REVISION	(	6	,
		6
	)

signal

◆ qmlAttachedProperties()

QQuickTableViewAttached * QQuickTableView::qmlAttachedProperties ( QObject * obj )

static

Definition at line 6323 of file qquicktableview.cpp.

◆ resizableColumns()

bool QQuickTableView::resizableColumns ( ) const

Definition at line 6492 of file qquicktableview.cpp.

◆ resizableRows()

bool QQuickTableView::resizableRows ( ) const

Definition at line 6510 of file qquicktableview.cpp.

◆ reuseItems()

bool QQuickTableView::reuseItems ( ) const

Definition at line 5464 of file qquicktableview.cpp.

References QQmlInstanceModel::Reusable.

◆ reuseItemsChanged

void QQuickTableView::reuseItemsChanged ( )

signal

Referenced by setReuseItems().

Here is the caller graph for this function:

◆ rightColumn()

int QQuickTableView::rightColumn ( ) const

Definition at line 5665 of file qquicktableview.cpp.

References d.

◆ rowHeightProvider()

QJSValue QQuickTableView::rowHeightProvider ( ) const

Definition at line 5381 of file qquicktableview.cpp.

◆ rowHeightProviderChanged

void QQuickTableView::rowHeightProviderChanged ( )

signal

Referenced by setRowHeightProvider().

Here is the caller graph for this function:

◆ rows()

int QQuickTableView::rows ( ) const

Definition at line 5333 of file qquicktableview.cpp.

◆ rowsChanged

void QQuickTableView::rowsChanged ( )

signal

◆ rowSpacing()

qreal QQuickTableView::rowSpacing ( ) const

Definition at line 5343 of file qquicktableview.cpp.

◆ rowSpacingChanged

void QQuickTableView::rowSpacingChanged ( )

signal

Referenced by setRowSpacing().

Here is the caller graph for this function:

◆ selectionBehavior()

QQuickTableView::SelectionBehavior QQuickTableView::selectionBehavior ( ) const

Definition at line 6462 of file qquicktableview.cpp.

◆ selectionMode()

QQuickTableView::SelectionMode QQuickTableView::selectionMode ( ) const

Definition at line 6477 of file qquicktableview.cpp.

◆ selectionModel()

QItemSelectionModel * QQuickTableView::selectionModel ( ) const

Definition at line 5570 of file qquicktableview.cpp.

◆ setAlternatingRows()

void QQuickTableView::setAlternatingRows ( bool alternatingRows )

Definition at line 6452 of file qquicktableview.cpp.

References alternatingRows, d, and emit.

◆ setAnimate()

void QQuickTableView::setAnimate ( bool animate )

Definition at line 5612 of file qquicktableview.cpp.

References animate, d, and emit.

◆ setColumnSpacing()

void QQuickTableView::setColumnSpacing ( qreal spacing )

Definition at line 5367 of file qquicktableview.cpp.

References QQuickTableViewPrivate::CalculateNewContentWidth, columnSpacingChanged(), d, emit, QQuickTableViewPrivate::LayoutOnly, qFuzzyCompare(), qt_is_finite(), qt_is_nan(), and spacing.

Here is the call graph for this function:

◆ setColumnWidthProvider()

void QQuickTableView::setColumnWidthProvider ( const QJSValue & provider )

Definition at line 5403 of file qquicktableview.cpp.

References QQuickTableViewPrivate::CalculateNewContentWidth, columnWidthProviderChanged(), d, emit, QJSValue::strictlyEquals(), and QQuickTableViewPrivate::ViewportOnly.

Here is the call graph for this function:

◆ setContentHeight()

void QQuickTableView::setContentHeight ( qreal height )

Definition at line 5493 of file qquicktableview.cpp.

References d, QQuickItem::height, and QQuickFlickable::setContentHeight().

Here is the call graph for this function:

◆ setContentWidth()

void QQuickTableView::setContentWidth ( qreal width )

Definition at line 5486 of file qquicktableview.cpp.

References d, QQuickFlickable::setContentWidth(), and QQuickItem::width.

Here is the call graph for this function:

◆ setDelegate()

void QQuickTableView::setDelegate ( QQmlComponent * newDelegate )

Definition at line 5436 of file qquicktableview.cpp.

References QQuickTableViewPrivate::All, d, delegateChanged(), and emit.

Here is the call graph for this function:

◆ setEditTriggers()

void QQuickTableView::setEditTriggers ( EditTriggers editTriggers )

Definition at line 5453 of file qquicktableview.cpp.

References d, editTriggers, and emit.

Referenced by QQuickTreeView::QQuickTreeView().

Here is the caller graph for this function:

◆ setKeyNavigationEnabled()

void QQuickTableView::setKeyNavigationEnabled ( bool enabled )

Definition at line 5632 of file qquicktableview.cpp.

References d, emit, and QQuickItem::enabled.

◆ setModel()

void QQuickTableView::setModel ( const QVariant & newModel )

Definition at line 5420 of file qquicktableview.cpp.

References d.

◆ setPointerNavigationEnabled()

void QQuickTableView::setPointerNavigationEnabled ( bool enabled )

Definition at line 5648 of file qquicktableview.cpp.

References d, emit, and QQuickItem::enabled.

◆ setResizableColumns()

void QQuickTableView::setResizableColumns ( bool enabled )

Definition at line 6497 of file qquicktableview.cpp.

References d, emit, and QQuickItem::enabled.

Referenced by QQuickHorizontalHeaderView::QQuickHorizontalHeaderView().

Here is the caller graph for this function:

◆ setResizableRows()

void QQuickTableView::setResizableRows ( bool enabled )

Definition at line 6515 of file qquicktableview.cpp.

References d, emit, and QQuickItem::enabled.

Referenced by QQuickVerticalHeaderView::QQuickVerticalHeaderView().

Here is the caller graph for this function:

◆ setReuseItems()

void QQuickTableView::setReuseItems ( bool reuseItems )

Definition at line 5469 of file qquicktableview.cpp.

References d, emit, QQmlInstanceModel::NotReusable, QQmlInstanceModel::Reusable, reuseItems, and reuseItemsChanged().

Here is the call graph for this function:

◆ setRowHeightProvider()

void QQuickTableView::setRowHeightProvider ( const QJSValue & provider )

Definition at line 5386 of file qquicktableview.cpp.

References QQuickTableViewPrivate::CalculateNewContentHeight, d, emit, rowHeightProviderChanged(), QJSValue::strictlyEquals(), and QQuickTableViewPrivate::ViewportOnly.

Here is the call graph for this function:

◆ setRowSpacing()

void QQuickTableView::setRowSpacing ( qreal spacing )

Definition at line 5348 of file qquicktableview.cpp.

References QQuickTableViewPrivate::CalculateNewContentHeight, d, emit, QQuickTableViewPrivate::LayoutOnly, qFuzzyCompare(), qt_is_finite(), qt_is_nan(), rowSpacingChanged(), and spacing.

Here is the call graph for this function:

◆ setSelectionBehavior()

void QQuickTableView::setSelectionBehavior ( SelectionBehavior selectionBehavior )

Definition at line 6467 of file qquicktableview.cpp.

References d, emit, and selectionBehavior.

Referenced by QQuickTreeView::QQuickTreeView().

Here is the caller graph for this function:

◆ setSelectionMode()

void QQuickTableView::setSelectionMode ( SelectionMode selectionMode )

Definition at line 6482 of file qquicktableview.cpp.

References d, emit, and selectionMode.

◆ setSelectionModel()

void QQuickTableView::setSelectionModel ( QItemSelectionModel * selectionModel )

Definition at line 5575 of file qquicktableview.cpp.

References QObjectPrivate::connect(), QItemSelectionModel::currentChanged(), QQuickTableViewPrivate::currentChangedInSelectionModel(), d, QObjectPrivate::disconnect(), emit, QItemSelectionModel::selectionChanged(), QQuickTableViewPrivate::selectionChangedInSelectionModel(), and selectionModel.

Here is the call graph for this function:

◆ setSyncDirection()

void QQuickTableView::setSyncDirection ( Qt::Orientations direction )

Definition at line 5557 of file qquicktableview.cpp.

References d, direction, emit, and QQuickTableViewPrivate::ViewportOnly.

Referenced by QQuickHeaderViewBase::QQuickHeaderViewBase().

Here is the caller graph for this function:

◆ setSyncView()

void QQuickTableView::setSyncView ( QQuickTableView * view )

Definition at line 5522 of file qquicktableview.cpp.

References d, emit, view, and QQuickTableViewPrivate::ViewportOnly.

◆ syncDirection()

Qt::Orientations QQuickTableView::syncDirection ( ) const

\qmlproperty Qt::Orientations QtQuick::TableView::syncDirection

If the \l syncView is set on a TableView, this property controls synchronization of flicking direction(s) for both tables. The default is {Qt.Horizontal | Qt.Vertical}, which means that if you flick either table in either direction, the other table is flicked the same amount in the same direction.

This property and \l syncView can be used to make two tableViews synchronize with each other smoothly in flicking regardless of the different overshoot/undershoot, velocity, acceleration/deceleration or rebound animation, and so on.

A typical use case is to make several headers flick along with the table.

See also: syncView

Definition at line 5552 of file qquicktableview.cpp.

◆ syncView()

QQuickTableView * QQuickTableView::syncView ( ) const

\qmlproperty TableView QtQuick::TableView::syncView

If this property of a TableView is set to another TableView, both the tables will synchronize with regard to flicking, column widths/row heights, and spacing according to \l syncDirection.

If \l syncDirection contains \l {Qt::Horizontal}{Qt.Horizontal}, current tableView's column widths, column spacing, and horizontal flicking movement synchronizes with syncView's.

If \l syncDirection contains \l {Qt::Vertical}{Qt.Vertical}, current tableView's row heights, row spacing, and vertical flicking movement synchronizes with syncView's.

See also: syncDirection

Definition at line 5517 of file qquicktableview.cpp.

◆ topRow()

int QQuickTableView::topRow ( ) const

Definition at line 5671 of file qquicktableview.cpp.

References d.

◆ viewportMoved()

void QQuickTableView::viewportMoved ( Qt::Orientations orientation )

overrideprotectedvirtual

Reimplemented from QQuickFlickable.

Definition at line 6342 of file qquicktableview.cpp.

References d, and QQuickFlickable::viewportMoved().

Here is the call graph for this function:

Member Data Documentation

◆ const

int column QQuickTableView::const

Definition at line 210 of file qquicktableview_p.h.

◆ includeSpacing [1/2]

bool QQuickTableView::includeSpacing = false) const

Definition at line 192 of file qquicktableview_p.h.

◆ includeSpacing [2/2]

qreal bool QQuickTableView::includeSpacing = false) const

Definition at line 193 of file qquicktableview_p.h.

◆ size

qreal QQuickTableView::size

Definition at line 216 of file qquicktableview_p.h.

◆ y

qreal QQuickTableView::y

Definition at line 193 of file qquicktableview_p.h.

Property Documentation

◆ alternatingRows

FINALbool QQuickTableView::alternatingRows

readwrite

Definition at line 61 of file qquicktableview_p.h.

Referenced by setAlternatingRows().

◆ animate

FINALbool QQuickTableView::animate

readwrite

Definition at line 56 of file qquicktableview_p.h.

Referenced by setAnimate().

◆ bottomRow

FINALint QQuickTableView::bottomRow

read

Definition at line 54 of file qquicktableview_p.h.

Referenced by positionViewAtRow().

◆ columns

int QQuickTableView::columns

read

Definition at line 333 of file qquicktableview_p.h.

Referenced by positionViewAtColumn().

◆ columnSpacing

qreal QQuickTableView::columnSpacing

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickTableViewPrivate::syncSyncView().

◆ columnWidthProvider

QJSValue QQuickTableView::columnWidthProvider

readwrite

Definition at line 333 of file qquicktableview_p.h.

◆ contentHeight

qreal QQuickTableView::contentHeight

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickTableViewPrivate::updateContentHeight().

◆ contentWidth

qreal QQuickTableView::contentWidth

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickTableViewPrivate::updateContentWidth().

◆ currentColumn

FINALint QQuickTableView::currentColumn

read

Definition at line 60 of file qquicktableview_p.h.

◆ currentRow

FINALint QQuickTableView::currentRow

read

Definition at line 59 of file qquicktableview_p.h.

◆ delegate

QQmlComponent * QQuickTableView::delegate

readwrite

Definition at line 333 of file qquicktableview_p.h.

◆ editTriggers

FINALEditTriggers QQuickTableView::editTriggers

readwrite

Definition at line 65 of file qquicktableview_p.h.

Referenced by QQuickTreeView::QQuickTreeView(), and setEditTriggers().

◆ keyNavigationEnabled

FINALbool QQuickTableView::keyNavigationEnabled

readwrite

Definition at line 57 of file qquicktableview_p.h.

Referenced by QQuickTreeView::keyPressEvent().

◆ leftColumn

FINALint QQuickTableView::leftColumn

read

Definition at line 51 of file qquicktableview_p.h.

Referenced by QQuickTreeView::collapse(), positionViewAtColumn(), and QQuickTableViewPrivate::syncSyncView().

◆ model

QVariant QQuickTableView::model

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickHeaderViewBasePrivate::syncModel().

◆ pointerNavigationEnabled

FINALbool QQuickTableView::pointerNavigationEnabled

readwrite

Definition at line 58 of file qquicktableview_p.h.

Referenced by QQuickTreeView::QQuickTreeView().

◆ resizableColumns

FINALbool QQuickTableView::resizableColumns

readwrite

Definition at line 63 of file qquicktableview_p.h.

◆ resizableRows

FINALbool QQuickTableView::resizableRows

readwrite

Definition at line 64 of file qquicktableview_p.h.

◆ reuseItems

bool QQuickTableView::reuseItems

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by setReuseItems().

◆ rightColumn

FINALint QQuickTableView::rightColumn

read

Definition at line 52 of file qquicktableview_p.h.

Referenced by QQuickTreeView::collapse(), and positionViewAtColumn().

◆ rowHeightProvider

QJSValue QQuickTableView::rowHeightProvider

readwrite

Definition at line 333 of file qquicktableview_p.h.

◆ rows

int QQuickTableView::rows

read

Definition at line 333 of file qquicktableview_p.h.

Referenced by positionViewAtRow().

◆ rowSpacing

qreal QQuickTableView::rowSpacing

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickTableViewPrivate::syncSyncView().

◆ selectionBehavior

FINALSelectionBehavior QQuickTableView::selectionBehavior

readwrite

Definition at line 62 of file qquicktableview_p.h.

Referenced by setSelectionBehavior().

◆ selectionMode

FINALSelectionMode QQuickTableView::selectionMode

readwrite

Definition at line 66 of file qquicktableview_p.h.

Referenced by setSelectionMode().

◆ selectionModel

FINALQItemSelectionModel * QQuickTableView::selectionModel

readwrite

Definition at line 55 of file qquicktableview_p.h.

Referenced by QQuickTreeView::keyPressEvent(), and setSelectionModel().

◆ syncDirection

FINALQt::Orientations QQuickTableView::syncDirection

readwrite

Definition at line 50 of file qquicktableview_p.h.

◆ syncView

QQuickTableView * QQuickTableView::syncView

readwrite

Definition at line 333 of file qquicktableview_p.h.

Referenced by QQuickTableViewPrivate::rootSyncView().

◆ topRow

FINALint QQuickTableView::topRow

read

Definition at line 53 of file qquicktableview_p.h.

Referenced by positionViewAtRow(), and QQuickTableViewPrivate::syncSyncView().

The documentation for this class was generated from the following files:

qtdeclarative/src/quick/items/qquicktableview_p.h
qtdeclarative/src/quick/items/qquicktableview.cpp

Public Types

Signals

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Properties

Private Member Functions

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ EditTrigger

◆ PositionModeFlag

◆ SelectionBehavior

◆ SelectionMode

Constructor & Destructor Documentation

◆ QQuickTableView() [1/2]

◆ ~QQuickTableView()

◆ QQuickTableView() [2/2]

Member Function Documentation

◆ alternatingRows()

◆ animate()

◆ bottomRow()

◆ columns()

◆ columnsChanged

◆ columnSpacing()

◆ columnSpacingChanged

◆ columnWidthProvider()

◆ columnWidthProviderChanged

◆ componentFinalized()

◆ currentColumn()

◆ currentRow()

◆ delegate()

◆ delegateChanged

◆ editTriggers()

◆ eventFilter()

◆ forceLayout()

◆ geometryChange()

◆ itemAtCell()

◆ keyNavigationEnabled()

◆ keyPressEvent()

◆ leftColumn()

◆ maxXExtent()

◆ maxYExtent()

◆ minXExtent()

◆ minYExtent()

◆ model()

◆ modelChanged

◆ pointerNavigationEnabled()

◆ positionViewAtCell()

◆ positionViewAtColumn()

◆ positionViewAtIndex()

◆ positionViewAtRow()

◆ Q_REVISION [1/41]

◆ Q_REVISION [2/41]

◆ Q_REVISION [3/41]

◆ Q_REVISION [4/41]

◆ Q_REVISION [5/41]

◆ Q_REVISION [6/41]

◆ Q_REVISION() [7/41]

◆ Q_REVISION() [8/41]

◆ Q_REVISION() [9/41]

◆ Q_REVISION() [10/41]

◆ Q_REVISION() [11/41]

◆ Q_REVISION() [12/41]

◆ Q_REVISION [13/41]

◆ Q_REVISION() [14/41]

◆ Q_REVISION() [15/41]

◆ Q_REVISION() [16/41]

◆ Q_REVISION() [17/41]

◆ Q_REVISION() [18/41]

◆ Q_REVISION() [19/41]

◆ Q_REVISION() [20/41]

◆ Q_REVISION [21/41]

◆ Q_REVISION [22/41]

◆ Q_REVISION [23/41]

◆ Q_REVISION [24/41]

◆ Q_REVISION [25/41]

◆ Q_REVISION [26/41]

◆ Q_REVISION [27/41]