\inmodule QtCore More...

#include <qabstractitemmodel.h>

Inheritance diagram for QAbstractItemModel:

Collaboration diagram for QAbstractItemModel:

Public Types
enum	LayoutChangeHint { NoLayoutChangeHint , VerticalSortHint , HorizontalSortHint }
	This enum describes the way the model changes layout. More...

enum class	CheckIndexOption { NoOption = 0x0000 , IndexIsValid = 0x0001 , DoNotUseParent = 0x0002 , ParentIsInvalid = 0x0004 }

Public Slots
virtual bool	submit ()
	Lets the model know that it should submit cached information to permanent storage.

virtual void	revert ()
	Lets the model know that it should discard cached information.

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals
void	dataChanged (const QModelIndex &topLeft, const QModelIndex &bottomRight, const QList< int > &roles=QList< int >())
	This signal is emitted whenever the data in an existing item changes.

void	headerDataChanged (Qt::Orientation orientation, int first, int last)
	This signal is emitted whenever a header is changed.

void	layoutChanged (const QList< QPersistentModelIndex > &parents=QList< QPersistentModelIndex >(), QAbstractItemModel::LayoutChangeHint hint=QAbstractItemModel::NoLayoutChangeHint)

void	layoutAboutToBeChanged (const QList< QPersistentModelIndex > &parents=QList< QPersistentModelIndex >(), QAbstractItemModel::LayoutChangeHint hint=QAbstractItemModel::NoLayoutChangeHint)

void	rowsAboutToBeInserted (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted just before rows are inserted into the model.

void	rowsInserted (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted after rows have been inserted into the model.

void	rowsAboutToBeRemoved (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted just before rows are removed from the model.

void	rowsRemoved (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted after rows have been removed from the model.

void	columnsAboutToBeInserted (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted just before columns are inserted into the model.

void	columnsInserted (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted after columns have been inserted into the model.

void	columnsAboutToBeRemoved (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted just before columns are removed from the model.

void	columnsRemoved (const QModelIndex &parent, int first, int last, QPrivateSignal)
	This signal is emitted after columns have been removed from the model.

void	modelAboutToBeReset (QPrivateSignal)

void	modelReset (QPrivateSignal)

void	rowsAboutToBeMoved (const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationRow, QPrivateSignal)

void	rowsMoved (const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationRow, QPrivateSignal)

void	columnsAboutToBeMoved (const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationColumn, QPrivateSignal)

void	columnsMoved (const QModelIndex &sourceParent, int sourceStart, int sourceEnd, const QModelIndex &destinationParent, int destinationColumn, QPrivateSignal)

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QAbstractItemModel (QObject *parent=nullptr)
	Constructs an abstract item model with the given parent.

virtual	~QAbstractItemModel ()
	Destroys the abstract item model.

Q_INVOKABLE bool	hasIndex (int row, int column, const QModelIndex &parent=QModelIndex()) const
	Returns {true} if the model returns a valid QModelIndex for row and column with parent, otherwise returns {false}.

virtual Q_INVOKABLE QModelIndex	index (int row, int column, const QModelIndex &parent=QModelIndex()) const =0
	Returns the index of the item in the model specified by the given row, column and parent index.

virtual Q_INVOKABLE QModelIndex	parent (const QModelIndex &child) const =0

virtual Q_INVOKABLE QModelIndex	sibling (int row, int column, const QModelIndex &idx) const
	Returns the sibling at row and column for the item at index, or an invalid QModelIndex if there is no sibling at that location.

virtual Q_INVOKABLE int	rowCount (const QModelIndex &parent=QModelIndex()) const =0
	Returns the number of rows under the given parent.

virtual Q_INVOKABLE int	columnCount (const QModelIndex &parent=QModelIndex()) const =0
	Returns the number of columns for the children of the given parent.

virtual Q_INVOKABLE bool	hasChildren (const QModelIndex &parent=QModelIndex()) const
	Returns {true} if parent has any children; otherwise returns {false}.

virtual Q_INVOKABLE QVariant	data (const QModelIndex &index, int role=Qt::DisplayRole) const =0
	Returns the data stored under the given role for the item referred to by the index.

virtual Q_INVOKABLE bool	setData (const QModelIndex &index, const QVariant &value, int role=Qt::EditRole)
	Sets the role data for the item at index to value.

virtual Q_INVOKABLE QVariant	headerData (int section, Qt::Orientation orientation, int role=Qt::DisplayRole) const
	Returns the data for the given role and section in the header with the specified orientation.

virtual bool	setHeaderData (int section, Qt::Orientation orientation, const QVariant &value, int role=Qt::EditRole)
	Sets the data for the given role and section in the header with the specified orientation to the value supplied.

virtual QMap< int, QVariant >	itemData (const QModelIndex &index) const
	Returns a map with values for all predefined roles in the model for the item at the given index.

virtual bool	setItemData (const QModelIndex &index, const QMap< int, QVariant > &roles)
	Sets the role data for the item at index to the associated value in roles, for every Qt::ItemDataRole.

virtual bool	clearItemData (const QModelIndex &index)

virtual QStringList	mimeTypes () const
	Returns the list of allowed MIME types.

virtual QMimeData *	mimeData (const QModelIndexList &indexes) const
	Returns an object that contains serialized items of data corresponding to the list of indexes specified.

virtual bool	canDropMimeData (const QMimeData *data, Qt::DropAction action, int row, int column, const QModelIndex &parent) const
	Returns {true} if a model can accept a drop of the data.

virtual bool	dropMimeData (const QMimeData *data, Qt::DropAction action, int row, int column, const QModelIndex &parent)
	Handles the data supplied by a drag and drop operation that ended with the given action.

virtual Qt::DropActions	supportedDropActions () const

virtual Qt::DropActions	supportedDragActions () const
	Returns the actions supported by the data in this model.

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool insertRows(int row

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool insertColumns(int column

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool removeRows(int row

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool removeColumns(int column

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool moveRows(const QModelIndex &sourceParent

Q_INVOKABLE	Q_REVISION (6, 4) virtual bool moveColumns(const QModelIndex &sourceParent

Q_INVOKABLE	Q_REVISION (6, 4) inline bool insertRow(int row

Q_INVOKABLE	Q_REVISION (6, 4) inline bool insertColumn(int column

Q_INVOKABLE	Q_REVISION (6, 4) inline bool removeRow(int row

Q_INVOKABLE	Q_REVISION (6, 4) inline bool removeColumn(int column

Q_INVOKABLE	Q_REVISION (6, 4) inline bool moveRow(const QModelIndex &sourceParent

Q_INVOKABLE	Q_REVISION (6, 4) inline bool moveColumn(const QModelIndex &sourceParent

virtual Q_INVOKABLE void	fetchMore (const QModelIndex &parent)
	Fetches any available data for the items with the parent specified by the parent index.

virtual Q_INVOKABLE bool	canFetchMore (const QModelIndex &parent) const
	Returns {true} if there is more data available for parent; otherwise returns {false}.

virtual Q_INVOKABLE Qt::ItemFlags	flags (const QModelIndex &index) const
	Returns the item flags for the given index.

Q_INVOKABLE	Q_REVISION (6, 4) virtual void sort(int column

virtual QModelIndex	buddy (const QModelIndex &index) const
	Returns a model index for the buddy of the item represented by index.

virtual Q_INVOKABLE QModelIndexList	match (const QModelIndex &start, int role, const QVariant &value, int hits=1, Qt::MatchFlags flags=Qt::MatchFlags(Qt::MatchStartsWith\|Qt::MatchWrap)) const
	Returns a list of indexes for the items in the column of the start index where data stored under the given role matches the specified value.

virtual QSize	span (const QModelIndex &index) const
	Returns the row and column span of the item represented by index.

virtual QHash< int, QByteArray >	roleNames () const

bool	checkIndex (const QModelIndex &index, CheckIndexOptions options=CheckIndexOption::NoOption) const

virtual void	multiData (const QModelIndex &index, QModelRoleDataSpan roleDataSpan) const

QObject *	parent () const
	Returns a pointer to the parent object.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

void	moveToThread (QThread *thread)
	Changes the thread affinity for this object and its children.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

template<typename T >
T	findChild (const QString &aName=QString(), Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (const QString &aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Attributes
Q_INVOKABLE int	count

Q_INVOKABLE int const QModelIndex &	parent = QModelIndex())
	Returns the parent of the model item with the given index.

Q_INVOKABLE int	sourceRow

Q_INVOKABLE int int	count

Q_INVOKABLE int int const QModelIndex &	destinationParent

Q_INVOKABLE int int const QModelIndex int	destinationChild

Q_INVOKABLE int	sourceColumn

Q_INVOKABLE const QModelIndex &	parent = QModelIndex())

Q_INVOKABLE int const QModelIndex &	destinationParent

Q_INVOKABLE int const QModelIndex int	destinationChild

Q_INVOKABLE Qt::SortOrder	order = Qt::AscendingOrder)

Protected Slots
virtual void	resetInternalData ()

Protected Member Functions
	QAbstractItemModel (QAbstractItemModelPrivate &dd, QObject *parent=nullptr)

QModelIndex	createIndex (int row, int column, const void *data=nullptr) const
	Creates a model index for the given row and column with the internal pointer ptr.

QModelIndex	createIndex (int row, int column, quintptr id) const
	Creates a model index for the given row and column with the internal identifier, id.

void	encodeData (const QModelIndexList &indexes, QDataStream &stream) const

bool	decodeData (int row, int column, const QModelIndex &parent, QDataStream &stream)

void	beginInsertRows (const QModelIndex &parent, int first, int last)
	Begins a row insertion operation.

void	endInsertRows ()
	Ends a row insertion operation.

void	beginRemoveRows (const QModelIndex &parent, int first, int last)
	Begins a row removal operation.

void	endRemoveRows ()
	Ends a row removal operation.

bool	beginMoveRows (const QModelIndex &sourceParent, int sourceFirst, int sourceLast, const QModelIndex &destinationParent, int destinationRow)

void	endMoveRows ()
	Ends a row move operation.

void	beginInsertColumns (const QModelIndex &parent, int first, int last)
	Begins a column insertion operation.

void	endInsertColumns ()
	Ends a column insertion operation.

void	beginRemoveColumns (const QModelIndex &parent, int first, int last)
	Begins a column removal operation.

void	endRemoveColumns ()
	Ends a column removal operation.

bool	beginMoveColumns (const QModelIndex &sourceParent, int sourceFirst, int sourceLast, const QModelIndex &destinationParent, int destinationColumn)
	Begins a column move operation.

void	endMoveColumns ()
	Ends a column move operation.

void	beginResetModel ()
	Begins a model reset operation.

void	endResetModel ()
	Completes a model reset operation.

void	changePersistentIndex (const QModelIndex &from, const QModelIndex &to)
	Changes the QPersistentModelIndex that is equal to the given from model index to the given to model index.

void	changePersistentIndexList (const QModelIndexList &from, const QModelIndexList &to)

QModelIndexList	persistentIndexList () const

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Friends
class	QPersistentModelIndexData

class	QAbstractItemViewPrivate

class	QAbstractProxyModel

Additional Inherited Members
Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Properties inherited from QObject
QString	objectName
	the name of this object

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

\inmodule QtCore

The QAbstractItemModel class provides the abstract interface for item model classes.

The QAbstractItemModel class defines the standard interface that item models must use to be able to interoperate with other components in the model/view architecture. It is not supposed to be instantiated directly. Instead, you should subclass it to create new models.

The QAbstractItemModel class is one of the \l{Model/View Classes} and is part of Qt's \l{Model/View Programming}{model/view framework}. It can be used as the underlying data model for the item view elements in QML or the item view classes in the Qt Widgets module.

If you need a model to use with an item view such as QML's List View element or the C++ widgets QListView or QTableView, you should consider subclassing QAbstractListModel or QAbstractTableModel instead of this class.

The underlying data model is exposed to views and delegates as a hierarchy of tables. If you do not make use of the hierarchy, then the model is a simple table of rows and columns. Each item has a unique index specified by a QModelIndex.

Every item of data that can be accessed via a model has an associated model index. You can obtain this model index using the index() function. Each index may have a sibling() index; child items have a parent() index.

Each item has a number of data elements associated with it and they can be retrieved by specifying a role (see \l Qt::ItemDataRole) to the model's data() function. Data for all available roles can be obtained at the same time using the itemData() function.

Data for each role is set using a particular \l Qt::ItemDataRole. Data for individual roles are set individually with setData(), or they can be set for all roles with setItemData().

Items can be queried with flags() (see \l Qt::ItemFlag) to see if they can be selected, dragged, or manipulated in other ways.

If an item has child objects, hasChildren() returns {true} for the corresponding index.

The model has a rowCount() and a columnCount() for each level of the hierarchy. Rows and columns can be inserted and removed with insertRows(), insertColumns(), removeRows(), and removeColumns().

The model emits signals to indicate changes. For example, dataChanged() is emitted whenever items of data made available by the model are changed. Changes to the headers supplied by the model cause headerDataChanged() to be emitted. If the structure of the underlying data changes, the model can emit layoutChanged() to indicate to any attached views that they should redisplay any items shown, taking the new structure into account.

The items available through the model can be searched for particular data using the match() function.

To sort the model, you can use sort().

Definition at line 233 of file qabstractitemmodel.h.

Member Enumeration Documentation

◆ CheckIndexOption

enum class QAbstractItemModel::CheckIndexOption

strong

Since: 5.11

This enum can be used to control the checks performed by QAbstractItemModel::checkIndex().

\value NoOption No check options are specified.

\value IndexIsValid The model index passed to QAbstractItemModel::checkIndex() is checked to be a valid model index.

\value DoNotUseParent Does not perform any check involving the usage of the parent of the index passed to QAbstractItemModel::checkIndex().

\value ParentIsInvalid The parent of the model index passed to QAbstractItemModel::checkIndex() is checked to be an invalid model index. If both this option and DoNotUseParent are specified, then this option is ignored.

Enumerator
NoOption
IndexIsValid
DoNotUseParent
ParentIsInvalid

Definition at line 317 of file qabstractitemmodel.h.

◆ LayoutChangeHint

enum QAbstractItemModel::LayoutChangeHint

This enum describes the way the model changes layout.

\value NoLayoutChangeHint No hint is available. \value VerticalSortHint Rows are being sorted. \value HorizontalSortHint Columns are being sorted.

Note that VerticalSortHint and HorizontalSortHint carry the meaning that items are being moved within the same parent, not moved to a different parent in the model, and not filtered out or in.

Enumerator
NoLayoutChangeHint
VerticalSortHint
HorizontalSortHint

Definition at line 309 of file qabstractitemmodel.h.

Constructor & Destructor Documentation

◆ QAbstractItemModel() [1/2]

QAbstractItemModel::QAbstractItemModel ( QObject * parent = nullptr )

explicit

Constructs an abstract item model with the given parent.

Definition at line 1699 of file qabstractitemmodel.cpp.

◆ ~QAbstractItemModel()

QAbstractItemModel::~QAbstractItemModel ( )

virtual

Destroys the abstract item model.

Definition at line 1715 of file qabstractitemmodel.cpp.

◆ QAbstractItemModel() [2/2]

QAbstractItemModel::QAbstractItemModel	(	QAbstractItemModelPrivate &	dd,
		QObject *	parent = `nullptr`
	)

protected

Definition at line 1707 of file qabstractitemmodel.cpp.

Member Function Documentation

◆ beginInsertColumns()

void QAbstractItemModel::beginInsertColumns	(	const QModelIndex &	parent,
		int	first,
		int	last
	)

protected

Begins a column insertion operation.

When reimplementing insertColumns() in a subclass, you must call this function before inserting data into the model's underlying data store.

The parent index corresponds to the parent into which the new columns are inserted; first and last are the column numbers of the new columns will have after they have been inserted.

\table 80% \row

\inlineimage modelview-begin-insert-columns.png Inserting columns
Specify the first and last column numbers for the span of columns you want to insert into an item in a model.

For example, as shown in the diagram, we insert three columns before column 4, so first is 4 and last is 6:

beginInsertColumns(parent, 4, 6);

QAbstractItemModel::parent

Q_INVOKABLE int const QModelIndex & parent

Returns the parent of the model item with the given index.

Definition qabstractitemmodel.h:276

QAbstractItemModel::beginInsertColumns

void beginInsertColumns(const QModelIndex &parent, int first, int last)

Begins a column insertion operation.

Definition qabstractitemmodel.cpp:3184

This inserts the three new columns as columns 4, 5, and 6. \row

\inlineimage modelview-begin-append-columns.png Appending columns

To append columns, insert them after the last column.

For example, as shown in the diagram, we append three columns to a
collection of six existing columns (ending in column 5), so
\a first is 6 and \a last is 8:

\snippet code/src_corelib_kernel_qabstractitemmodel.cpp 4

This appends the two new columns as columns 6, 7, and 8.

\endtable

Note: This function emits the columnsAboutToBeInserted() signal which connected views (or proxies) must handle before the data is inserted. Otherwise, the views may end up in an invalid state.

See also: endInsertColumns()

Definition at line 3184 of file qabstractitemmodel.cpp.

References columnCount(), columnsAboutToBeInserted(), d, emit, parent, and Q_ASSERT.

Referenced by QSqlQueryModel::beginInsertColumns(), QTreeModel::insertColumns(), QTableModel::insertColumns(), TableModel::insertColumns(), QTreeModel::setColumnCount(), and QtPrivate::QCalendarModel::setWeekNumbersShown().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ beginInsertRows()

void QAbstractItemModel::beginInsertRows	(	const QModelIndex &	parent,
		int	first,
		int	last
	)

protected

Begins a row insertion operation.

When reimplementing insertRows() in a subclass, you must call this function before inserting data into the model's underlying data store.

The parent index corresponds to the parent into which the new rows are inserted; first and last are the row numbers that the new rows will have after they have been inserted.

\table 80% \row

\inlineimage modelview-begin-insert-rows.png Inserting rows
Specify the first and last row numbers for the span of rows you want to insert into an item in a model.

For example, as shown in the diagram, we insert three rows before row 2, so first is 2 and last is 4:

beginInsertRows(parent, 2, 4);

QAbstractItemModel::beginInsertRows

void beginInsertRows(const QModelIndex &parent, int first, int last)

Begins a row insertion operation.

Definition qabstractitemmodel.cpp:2874

This inserts the three new rows as rows 2, 3, and 4. \row

\inlineimage modelview-begin-append-rows.png Appending rows

To append rows, insert them after the last row.

For example, as shown in the diagram, we append two rows to a
collection of 4 existing rows (ending in row 3), so \a first is 4
and \a last is 5:

\snippet code/src_corelib_kernel_qabstractitemmodel.cpp 1

This appends the two new rows as rows 4 and 5.

\endtable

Note: This function emits the rowsAboutToBeInserted() signal which connected views (or proxies) must handle before the data is inserted. Otherwise, the views may end up in an invalid state.

See also: endInsertRows()

Definition at line 2874 of file qabstractitemmodel.cpp.

References d, emit, parent, Q_ASSERT, rowCount(), and rowsAboutToBeInserted().

Referenced by QConcatenateTablesProxyModel::addSourceModel(), QTreeModel::beginInsertItems(), QSqlQueryModel::beginInsertRows(), QListModel::insert(), QListModel::insert(), TableModel::insertRows(), QTreeModel::insertRows(), QStringListModel::insertRows(), QListModel::insertRows(), QTableModel::insertRows(), QtPrivate::QCalendarModel::setHorizontalHeaderFormat(), QQmlTreeModelToTableModel::showModelChildItems(), and ListModel::sync().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ beginMoveColumns()

bool QAbstractItemModel::beginMoveColumns	(	const QModelIndex &	sourceParent,
		int	sourceFirst,
		int	sourceLast,
		const QModelIndex &	destinationParent,
		int	destinationChild
	)

protected

Begins a column move operation.

When reimplementing a subclass, this method simplifies moving entities in your model. This method is responsible for moving persistent indexes in the model, which you would otherwise be required to do yourself. Using beginMoveColumns and endMoveColumns is an alternative to emitting layoutAboutToBeChanged and layoutChanged directly along with changePersistentIndex.

The sourceParent index corresponds to the parent from which the columns are moved; sourceFirst and sourceLast are the first and last column numbers of the columns to be moved. The destinationParent index corresponds to the parent into which those columns are moved. The destinationChild is the column to which the columns will be moved. That is, the index at column sourceFirst in sourceParent will become column destinationChild in destinationParent, followed by all other columns up to sourceLast.

However, when moving columns down in the same parent (sourceParent and destinationParent are equal), the columns will be placed before the destinationChild index. That is, if you wish to move columns 0 and 1 so they will become columns 1 and 2, destinationChild should be 3. In this case, the new index for the source column i (which is between sourceFirst and sourceLast) is equal to {(destinationChild-sourceLast-1+i)}.

Note that if sourceParent and destinationParent are the same, you must ensure that the destinationChild is not within the range of sourceFirst and sourceLast + 1. You must also ensure that you do not attempt to move a column to one of its own children or ancestors. This method returns {false} if either condition is true, in which case you should abort your move operation.

See also: endMoveColumns()

Since: 4.6

Definition at line 3305 of file qabstractitemmodel.cpp.

References columnsAboutToBeMoved(), d, destinationChild, destinationParent, emit, Qt::Horizontal, QModelIndex::isValid(), QAbstractItemModelPrivate::Change::needsAdjust, QModelIndex::parent(), Q_ASSERT, and QModelIndex::row().

Here is the call graph for this function:

◆ beginMoveRows()

bool QAbstractItemModel::beginMoveRows	(	const QModelIndex &	sourceParent,
		int	sourceFirst,
		int	sourceLast,
		const QModelIndex &	destinationParent,
		int	destinationChild
	)

protected

Since: 4.6

Begins a row move operation.

When reimplementing a subclass, this method simplifies moving entities in your model. This method is responsible for moving persistent indexes in the model, which you would otherwise be required to do yourself. Using beginMoveRows and endMoveRows is an alternative to emitting layoutAboutToBeChanged and layoutChanged directly along with changePersistentIndex.

The sourceParent index corresponds to the parent from which the rows are moved; sourceFirst and sourceLast are the first and last row numbers of the rows to be moved. The destinationParent index corresponds to the parent into which those rows are moved. The destinationChild is the row to which the rows will be moved. That is, the index at row sourceFirst in sourceParent will become row destinationChild in destinationParent, followed by all other rows up to sourceLast.

However, when moving rows down in the same parent (sourceParent and destinationParent are equal), the rows will be placed before the destinationChild index. That is, if you wish to move rows 0 and 1 so they will become rows 1 and 2, destinationChild should be 3. In this case, the new index for the source row i (which is between sourceFirst and sourceLast) is equal to {(destinationChild-sourceLast-1+i)}.

Note that if sourceParent and destinationParent are the same, you must ensure that the destinationChild is not within the range of sourceFirst and sourceLast + 1. You must also ensure that you do not attempt to move a row to one of its own children or ancestors. This method returns {false} if either condition is true, in which case you should abort your move operation.

\table 80% \row

\inlineimage modelview-move-rows-1.png Moving rows to another parent
Specify the first and last row numbers for the span of rows in the source parent you want to move in the model. Also specify the row in the destination parent to move the span to.

For example, as shown in the diagram, we move three rows from row 2 to 4 in the source, so sourceFirst is 2 and sourceLast is 4. We move those items to above row 2 in the destination, so destinationChild is 2.

beginMoveRows(sourceParent, 2, 4, destinationParent, 2);

QAbstractItemModel::beginMoveRows

bool beginMoveRows(const QModelIndex &sourceParent, int sourceFirst, int sourceLast, const QModelIndex &destinationParent, int destinationRow)

Definition qabstractitemmodel.cpp:3086

QAbstractItemModel::destinationParent

Q_INVOKABLE int int const QModelIndex & destinationParent

Definition qabstractitemmodel.h:281

This moves the three rows rows 2, 3, and 4 in the source to become 2, 3 and 4 in the destination. Other affected siblings are displaced accordingly. \row

\inlineimage modelview-move-rows-2.png Moving rows to append to another parent

To append rows to another parent, move them to after the last row.

For example, as shown in the diagram, we move three rows to a
collection of 6 existing rows (ending in row 5), so \a destinationChild is 6:

\snippet code/src_corelib_kernel_qabstractitemmodel.cpp 7

This moves the target rows to the end of the target parent as 6, 7 and 8.

\row

\inlineimage modelview-move-rows-3.png Moving rows in the same parent up

To move rows within the same parent, specify the row to move them to.

For example, as shown in the diagram, we move one item from row 2 to row 0,
so \a sourceFirst and \a sourceLast are 2 and \a destinationChild is 0.

\snippet code/src_corelib_kernel_qabstractitemmodel.cpp 8

Note that other rows may be displaced accordingly. Note also that when moving
items within the same parent you should not attempt invalid or no-op moves. In
the above example, item 2 is at row 2 before the move, so it cannot be moved
to row 2 (where it is already) or row 3 (no-op as row 3 means above row 3, where
it is already)

\row

\inlineimage modelview-move-rows-4.png Moving rows in the same parent down

To move rows within the same parent, specify the row to move them to.

For example, as shown in the diagram, we move one item from row 2 to row 4,
so \a sourceFirst and \a sourceLast are 2 and \a destinationChild is 4.

\snippet code/src_corelib_kernel_qabstractitemmodel.cpp 9

Note that other rows may be displaced accordingly.

\endtable

See also: endMoveRows()

Definition at line 3086 of file qabstractitemmodel.cpp.

References d, destinationChild, destinationParent, emit, QModelIndex::isValid(), QAbstractItemModelPrivate::Change::needsAdjust, QModelIndex::parent(), Q_ASSERT, QModelIndex::row(), rowsAboutToBeMoved(), and Qt::Vertical.

Referenced by QQmlListModel::move(), QListModel::move(), QQmlTableModel::moveRow(), QStringListModel::moveRows(), QListModel::moveRows(), and ListModel::sync().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ beginRemoveColumns()

void QAbstractItemModel::beginRemoveColumns	(	const QModelIndex &	parent,
		int	first,
		int	last
	)

protected

Begins a column removal operation.

When reimplementing removeColumns() in a subclass, you must call this function before removing data from the model's underlying data store.

The parent index corresponds to the parent from which the new columns are removed; first and last are the column numbers of the first and last columns to be removed.

\table 80% \row

\inlineimage modelview-begin-remove-columns.png Removing columns
Specify the first and last column numbers for the span of columns you want to remove from an item in a model.

For example, as shown in the diagram, we remove the three columns from column 4 to column 6, so first is 4 and last is 6:

beginRemoveColumns(parent, 4, 6);

QAbstractItemModel::beginRemoveColumns

void beginRemoveColumns(const QModelIndex &parent, int first, int last)

Begins a column removal operation.

Definition qabstractitemmodel.cpp:3240

\endtable

Note: This function emits the columnsAboutToBeRemoved() signal which connected views (or proxies) must handle before the data is removed. Otherwise, the views may end up in an invalid state.

See also: endRemoveColumns()

Definition at line 3240 of file qabstractitemmodel.cpp.

References columnCount(), columnsAboutToBeRemoved(), d, emit, parent, and Q_ASSERT.

Referenced by QSqlQueryModel::beginRemoveColumns(), QTableModel::removeColumns(), TableModel::removeColumns(), QTreeModel::setColumnCount(), and QtPrivate::QCalendarModel::setWeekNumbersShown().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ beginRemoveRows()

void QAbstractItemModel::beginRemoveRows	(	const QModelIndex &	parent,
		int	first,
		int	last
	)

protected

Begins a row removal operation.

When reimplementing removeRows() in a subclass, you must call this function before removing data from the model's underlying data store.

The parent index corresponds to the parent from which the new rows are removed; first and last are the row numbers of the rows to be removed.

\table 80% \row

\inlineimage modelview-begin-remove-rows.png Removing rows
Specify the first and last row numbers for the span of rows you want to remove from an item in a model.

For example, as shown in the diagram, we remove the two rows from row 2 to row 3, so first is 2 and last is 3:

beginRemoveRows(parent, 2, 3);

QAbstractItemModel::beginRemoveRows

void beginRemoveRows(const QModelIndex &parent, int first, int last)

Begins a row removal operation.

Definition qabstractitemmodel.cpp:2929

\endtable

Note: This function emits the rowsAboutToBeRemoved() signal which connected views (or proxies) must handle before the data is removed. Otherwise, the views may end up in an invalid state.

See also: endRemoveRows()

Definition at line 2929 of file qabstractitemmodel.cpp.

References d, emit, parent, Q_ASSERT, rowCount(), and rowsAboutToBeRemoved().

Referenced by QTreeModel::beginRemoveItems(), QSqlQueryModel::beginRemoveRows(), QListModel::remove(), QQmlTableModel::removeRow(), TableModel::removeRows(), QStringListModel::removeRows(), QTreeModel::removeRows(), QListModel::removeRows(), QTableModel::removeRows(), QConcatenateTablesProxyModel::removeSourceModel(), QQmlTreeModelToTableModel::removeVisibleRows(), QtPrivate::QCalendarModel::setHorizontalHeaderFormat(), ListModel::sync(), and QListModel::take().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ beginResetModel()

void QAbstractItemModel::beginResetModel ( )

protected

Begins a model reset operation.

A reset operation resets the model to its current state in any attached views.

Note: Any views attached to this model will be reset as well.

When a model is reset it means that any previous data reported from the model is now invalid and has to be queried for again. This also means that the current item and any selected items will become invalid.

When a model radically changes its data it can sometimes be easier to just call this function rather than emit dataChanged() to inform other components when the underlying data source, or its structure, has changed.

You must call this function before resetting any internal data structures in your model or proxy model.

This function emits the signal modelAboutToBeReset().

See also: modelAboutToBeReset(), modelReset(), endResetModel()

Since: 4.6

Definition at line 3384 of file qabstractitemmodel.cpp.

References emit, and modelAboutToBeReset().

Referenced by QPdfPageModel::QPdfPageModel(), QSqlQueryModel::beginResetModel(), QStandardItemModel::clear(), QListModel::clear(), QTreeModel::clear(), QTableModel::clearContents(), QQmlTreeModelToTableModel::clearModelData(), QCompletionModel::filter(), QDeclarativePlaceContentModel::initializeCollection(), QDeclarativeSearchModelBase::initializePlugin(), QDeclarativeSearchSuggestionModel::queryFinished(), QDeclarativeGeocodeModel::reset(), QDeclarativeGeoRouteModel::reset(), QDeclarativeSearchModelBase::reset(), QCompletionModel::setFiltered(), QQuickFolderListModel::setFolder(), QQuick3DRenderStatsMeshesModel::setMeshData(), QHeaderDataProxyModel::setOrientation(), QQuick3DRenderStatsPassesModel::setPassData(), QDeclarativePlaceContentModel::setPlace(), QPdfSearchModel::setSearchString(), QHeaderDataProxyModel::setSourceModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QStringListModel::setStringList(), and QQuick3DRenderStatsTexturesModel::setTextureData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ buddy()

QModelIndex QAbstractItemModel::buddy ( const QModelIndex & index ) const

virtual

Returns a model index for the buddy of the item represented by index.

When the user wants to edit an item, the view will call this function to check whether another item in the model should be edited instead. Then, the view will construct a delegate using the model index returned by the buddy item.

The default implementation of this function has each item as its own buddy.

Reimplemented in QAbstractProxyModel, and QSortFilterProxyModel.

Definition at line 2472 of file qabstractitemmodel.cpp.

Referenced by QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QAbstractItemViewPrivate::openEditor(), and QAbstractItemViewPrivate::sendDelegateEvent().

Here is the caller graph for this function:

◆ canDropMimeData()

bool QAbstractItemModel::canDropMimeData	(	const QMimeData *	data,
		Qt::DropAction	action,
		int	row,
		int	column,
		const QModelIndex &	parent
	)		const

virtual

Returns {true} if a model can accept a drop of the data.

This default implementation only checks if data has at least one format in the list of mimeTypes() and if action is among the model's supportedDropActions().

Reimplement this function in your custom model, if you want to test whether the data can be dropped at row, column, parent with action. If you don't need that test, it is not necessary to reimplement this function.

See also: dropMimeData(), {Using drag and drop with item views}

Reimplemented in QAbstractProxyModel, QConcatenateTablesProxyModel, and DragDropListModel.

Definition at line 2150 of file qabstractitemmodel.cpp.

References i, mimeTypes(), parent, Q_UNUSED, and supportedDropActions().

Referenced by QConcatenateTablesProxyModel::canDropMimeData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ canFetchMore()

bool QAbstractItemModel::canFetchMore ( const QModelIndex & parent ) const

virtual

Returns {true} if there is more data available for parent; otherwise returns {false}.

The default implementation always returns {false}.

If canFetchMore() returns true, the fetchMore() function should be called. This is the behavior of QAbstractItemView, for example.

See also: fetchMore()

Reimplemented in QAbstractProxyModel, QSortFilterProxyModel, QFileSystemModel, QDeclarativePlaceContentModel, and QSqlQueryModel.

Definition at line 2428 of file qabstractitemmodel.cpp.

Referenced by QTreeViewPrivate::expand(), QQmlTreeModelToTableModel::expandPendingRows(), QAbstractItemViewPrivate::fetchMore(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QQmlTreeModelToTableModel::showModelChildItems(), and QQmlTreeModelToTableModel::showModelTopLevelItems().

Here is the caller graph for this function:

◆ changePersistentIndex()

void QAbstractItemModel::changePersistentIndex	(	const QModelIndex &	from,
		const QModelIndex &	to
	)

protected

Changes the QPersistentModelIndex that is equal to the given from model index to the given to model index.

If no persistent model index equal to the given from model index was found, nothing is changed.

See also: persistentIndexList(), changePersistentIndexList()

Definition at line 3417 of file qabstractitemmodel.cpp.

References d, QModelIndex::isValid(), and it.

Here is the call graph for this function:

◆ changePersistentIndexList()

void QAbstractItemModel::changePersistentIndexList	(	const QModelIndexList &	from,
		const QModelIndexList &	to
	)

protected

Since: 4.1

Changes the {QPersistentModelIndex}es that are equal to the indexes in the given from model index list to the given to model index list.

If no persistent model indexes equal to the indexes in the given from model index list are found, nothing is changed.

See also: persistentIndexList(), changePersistentIndex()

Definition at line 3444 of file qabstractitemmodel.cpp.

References QList< T >::at(), d, i, it, QList< T >::reserve(), and QList< T >::size().

Referenced by QListModel::ensureSorted(), QTableModel::ensureSorted(), QTreeModel::ensureSorted(), QTableModel::setItem(), QListModel::sort(), QTableModel::sort(), QStringListModel::sort(), QFileSystemModel::sort(), QStandardItemPrivate::sortChildren(), and QTreeModel::sortItems().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ checkIndex()

bool QAbstractItemModel::checkIndex	(	const QModelIndex &	index,
		CheckIndexOptions	options = `CheckIndexOption::NoOption`
	)		const

Since: 5.11

This function checks whether index is a legal model index for this model. A legal model index is either an invalid model index, or a valid model index for which all the following holds:

\list

the index' model is {this};
the index' row is greater or equal than zero;
the index' row is less than the row count for the index' parent;
the index' column is greater or equal than zero;
the index' column is less than the column count for the index' parent.

\endlist

The options argument may change some of these checks. If options contains {IndexIsValid}, then index must be a valid index; this is useful when reimplementing functions such as \l{data()} or \l{setData()}, which expect valid indexes.

If options contains {DoNotUseParent}, then the checks that would call \l{parent()} are omitted; this allows calling this function from a \l{parent()} reimplementation (otherwise, this would result in endless recursion and a crash).

If options does not contain {DoNotUseParent}, and it contains {ParentIsInvalid}, then an additional check is performed: the parent index is checked for not being valid. This is useful when implementing flat models such as lists or tables, where no model index should have a valid parent index.

This function returns true if all the checks succeeded, and false otherwise. This allows to use the function in \l{Q_ASSERT} and similar other debugging mechanisms. If some check failed, a warning message will be printed in the {qt.core.qabstractitemmodel.checkindex} logging category, containing some information that may be useful for debugging the failure.

Note: This function is a debugging helper for implementing your own item models. When developing complex models, as well as when building complicated model hierarchies (e.g. using proxy models), it is useful to call this function in order to catch bugs relative to illegal model indices (as defined above) accidentally passed to some QAbstractItemModel API.

Warning: Note that it's undefined behavior to pass illegal indices to item models, so applications must refrain from doing so, and not rely on any "defensive" programming that item models could employ to handle illegal indexes gracefully.

See also: QModelIndex

Definition at line 3558 of file qabstractitemmodel.cpp.

References columnCount(), DoNotUseParent, IndexIsValid, QModelIndex::isValid(), QModelIndex::parent(), ParentIsInvalid, qCWarning, and rowCount().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ clearItemData()

bool QAbstractItemModel::clearItemData ( const QModelIndex & index )

virtual

Since: 6.0 Removes the data stored in all the roles for the given index. Returns {true} if successful; otherwise returns {false}. The dataChanged() signal should be emitted if the data was successfully removed. The base class implementation returns {false}

See also: data(), itemData(), setData(), setItemData()

Reimplemented in QAbstractProxyModel, QStringListModel, QStandardItemModel, QSqlTableModel, QListModel, QTableModel, and QTreeModel.

Definition at line 2043 of file qabstractitemmodel.cpp.

References Q_UNUSED.

◆ columnCount()

int QAbstractItemModel::columnCount ( const QModelIndex & parent = QModelIndex() ) const

pure virtual

Returns the number of columns for the children of the given parent.

In most subclasses, the number of columns is independent of the parent.

For example:

Note: When implementing a table based model, columnCount() should return 0 when the parent is valid.

See also: rowCount()

Implemented in QEmptyItemModel, TableModel, QCompletionModel, QAbstractListModel, QtPrivate::QCalendarModel, QDeclarativeSupportedCategoriesModel, QQuick3DRenderStatsMeshesModel, QQuick3DRenderStatsPassesModel, QQuick3DRenderStatsTexturesModel, QConcatenateTablesProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QTransposeProxyModel, QFileSystemModel, QStandardItemModel, QSqlQueryModel, TableModel, QTableModel, QTreeModel, QUndoModel, QQmlTableModel, QQmlTreeModelToTableModel, QHeaderDataProxyModel, QQuickViewTestUtils::QaimModel, and QPdfBookmarkModel.

Here is the caller graph for this function:

◆ columnsAboutToBeInserted

void QAbstractItemModel::columnsAboutToBeInserted	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted just before columns are inserted into the model.

The new items will be positioned between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: insertColumns(), beginInsertColumns()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), beginInsertColumns(), QStandardItemPrivate::insertColumns(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ columnsAboutToBeMoved

void QAbstractItemModel::columnsAboutToBeMoved	(	const QModelIndex &	sourceParent,
		int	sourceStart,
		int	sourceEnd,
		const QModelIndex &	destinationParent,
		int	destinationColumn,
		QPrivateSignal
	)

signal

Since: 4.6

This signal is emitted just before columns are moved within the model. The items that will be moved are those between sourceStart and sourceEnd inclusive, under the given sourceParent item. They will be moved to destinationParent starting at the column destinationColumn.

{Note:} Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: beginMoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), beginMoveColumns(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ columnsAboutToBeRemoved

void QAbstractItemModel::columnsAboutToBeRemoved	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted just before columns are removed from the model.

The items to be removed are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: removeColumns(), beginRemoveColumns()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), beginRemoveColumns(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ columnsInserted

void QAbstractItemModel::columnsInserted	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted after columns have been inserted into the model.

The new items are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: insertColumns(), beginInsertColumns()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endInsertColumns(), QStandardItemPrivate::insertColumns(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), and QCompletionModel::setSourceModel().

Here is the caller graph for this function:

◆ columnsMoved

void QAbstractItemModel::columnsMoved	(	const QModelIndex &	sourceParent,
		int	sourceStart,
		int	sourceEnd,
		const QModelIndex &	destinationParent,
		int	destinationColumn,
		QPrivateSignal
	)

signal

Since: 4.6

This signal is emitted after columns have been moved within the model. The items between sourceStart and sourceEnd inclusive, under the given sourceParent item have been moved to destinationParent starting at the column destinationColumn.

{Note:} Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: beginMoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endMoveColumns(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ columnsRemoved

void QAbstractItemModel::columnsRemoved	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted after columns have been removed from the model.

The removed items are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: removeColumns(), beginRemoveColumns()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endRemoveColumns(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), and QCompletionModel::setSourceModel().

Here is the caller graph for this function:

◆ createIndex() [1/2]

QModelIndex QAbstractItemModel::createIndex	(	int	row,
		int	column,
		const void *	ptr = `nullptr`
	)		const

inlineprotected

Creates a model index for the given row and column with the internal pointer ptr.

When using a QSortFilterProxyModel, its indexes have their own internal pointer. It is not advisable to access this internal pointer outside of the model. Use the data() function instead.

This function provides a consistent interface that model subclasses must use to create model indexes.

Definition at line 420 of file qabstractitemmodel.h.

Referenced by QTreeModel::createIndexFromItem(), QAbstractProxyModel::createSourceIndex(), QCompletionModel::currentIndex(), QDeclarativeSearchResultModel::data(), QTreeModel::emitDataChanged(), endMoveColumns(), endMoveRows(), QListModel::ensureSorted(), QTreeModel::ensureSorted(), QListModel::index(), QTreeModel::index(), QCompletionModel::index(), QTreeModel::index(), QQmlListModel::index(), QQmlXmlListModel::index(), QDeclarativeSupportedCategoriesModel::index(), QAbstractTableModel::index(), QFileSystemModel::index(), QStandardItemModel::index(), QUndoModel::index(), QQuickFolderListModel::index(), QQmlTableModel::index(), QQmlTreeModelToTableModel::index(), QHeaderDataProxyModel::index(), QPdfBookmarkModel::index(), QAbstractListModel::index(), QListModel::index(), QStandardItemModel::indexFromItem(), QSqlQueryModel::indexInQuery(), QSqlTableModel::indexInQuery(), QQuickFolderListModel::isFolder(), QConcatenateTablesProxyModel::mapFromSource(), QIdentityProxyModel::mapFromSource(), QCompletionModel::mapFromSource(), QFileSystemModel::parent(), QPdfBookmarkModel::parent(), QSqlQueryModel::record(), QUndoModel::selectedIndex(), QSqlTableModel::selectRow(), QSqlQueryModel::setQuery(), QSqlTableModel::setRecord(), QQmlTableModel::setRow(), QStringListModel::sibling(), QFileSystemModel::sibling(), QListModel::sort(), QTableModel::sort(), QStandardItemPrivate::sortChildren(), QTreeModel::sortItems(), and ListModel::sync().

Here is the caller graph for this function:

◆ createIndex() [2/2]

QModelIndex QAbstractItemModel::createIndex	(	int	row,
		int	column,
		quintptr	id
	)		const

inlineprotected

Creates a model index for the given row and column with the internal identifier, id.

This function provides a consistent interface that model subclasses must use to create model indexes.

See also: QModelIndex::internalId()

Definition at line 422 of file qabstractitemmodel.h.

◆ data()

QVariant QAbstractItemModel::data	(	const QModelIndex &	index,
		int	role = `Qt::DisplayRole`
	)		const

pure virtual

Returns the data stored under the given role for the item referred to by the index.

Note: If you do not have a value to return, return an invalid (default-constructed) QVariant.

See also: Qt::ItemDataRole, setData(), headerData()

Implemented in QQmlTreeModelToTableModel, QEmptyItemModel, QQuickViewTestUtils::StressTestModel, QSqlTableModel, DateFormatProxyModel, TableModel, StringListModel, QtPrivate::QCalendarModel, QQmlListModel, QQmlXmlListModel, TableModel, QQuickCalendarModel, QQuickDayOfWeekModel, QQuickMonthModel, QQuickWeekNumberModel, QDeclarativeGeocodeModel, QDeclarativeGeoRouteModel, QDeclarativePlaceContentModel, QDeclarativeSearchSuggestionModel, QDeclarativeSupportedCategoriesModel, QQuick3DRenderStatsMeshesModel, QQuick3DRenderStatsPassesModel, QQuick3DRenderStatsTexturesModel, InstanceModel, QPdfBookmarkModel, QPdfPageModel, QPdfLinkModel, QPdfSearchModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, QStringListModel, QFileSystemModel, QStandardItemModel, QListModel, QTableModel, QTreeModel, QCompletionModel, QUndoModel, QQuickFolderListModel, QQmlTableModel, QHeaderDataProxyModel, QQuickViewTestUtils::QaimModel, QDeclarativeSearchResultModel, QQuickPlaylist, MyModel, MyModel, QSqlQueryModel, QSqlRelationalTableModel, and QAbstractProxyModel.

Here is the caller graph for this function:

◆ dataChanged

void QAbstractItemModel::dataChanged	(	const QModelIndex &	topLeft,
		const QModelIndex &	bottomRight,
		const QList< int > &	roles = `QList<int>()`
	)

signal

This signal is emitted whenever the data in an existing item changes.

If the items are of the same parent, the affected ones are those between topLeft and bottomRight inclusive. If the items do not have the same parent, the behavior is undefined.

When reimplementing the setData() function, this signal must be emitted explicitly.

The optional roles argument can be used to specify which data roles have actually been modified. An empty vector in the roles argument means that all roles should be considered modified. The order of elements in the roles argument does not have any relevance.

See also: headerDataChanged(), setData(), layoutChanged()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QQuickTreeView::QQuickTreeView(), QConcatenateTablesProxyModel::addSourceModel(), QStandardItemPrivate::childDeleted(), QListModel::clearItemData(), QTableModel::clearItemData(), QTreeModel::clearItemData(), QTreeModel::emitDataChanged(), QQmlTreeModelToTableModel::expandRow(), QtPrivate::QCalendarModel::internalUpdate(), QListModel::itemChanged(), QTableModel::itemChanged(), QTreeModel::itemChanged(), QTableModel::removeItem(), QSqlTableModel::selectRow(), QStandardItemPrivate::setChild(), QQmlTableModel::setData(), QStringListModel::setData(), QSqlTableModel::setData(), TableModel::setData(), QHeaderDataProxyModel::setData(), QTableModel::setItem(), QQuickDayOfWeekModel::setLocale(), QQuickMonthModel::setLocale(), QQmlTableInstanceModel::setModel(), QQuickComboBox::setModel(), QQmlTreeModelToTableModel::setModel(), QQuickMonthModel::setMonth(), QQmlTableModel::setRow(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QCompletionModel::setSourceModel(), QQuickMonthModel::setYear(), ListModel::sync(), and QTableModel::takeItem().

Here is the caller graph for this function:

◆ decodeData()

bool QAbstractItemModel::decodeData	(	int	row,
		int	column,
		const QModelIndex &	parent,
		QDataStream &	stream
	)

protected

Definition at line 2750 of file qabstractitemmodel.cpp.

References QList< T >::append(), QList< T >::at(), columnCount(), i, j, parent, qBound(), qMax(), qMin(), QBitArray::resize(), QBitArray::setBit(), setItemData(), QList< T >::size(), and QBitArray::testBit().

Referenced by dropMimeData(), QAbstractTableModel::dropMimeData(), and QAbstractListModel::dropMimeData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ dropMimeData()

bool QAbstractItemModel::dropMimeData	(	const QMimeData *	data,
		Qt::DropAction	action,
		int	row,
		int	column,
		const QModelIndex &	parent
	)

virtual

Handles the data supplied by a drag and drop operation that ended with the given action.

Returns {true} if the data and action were handled by the model; otherwise returns {false}.

The specified row, column and parent indicate the location of an item in the model where the operation ended. It is the responsibility of the model to complete the action at the correct location.

For instance, a drop action on an item in a QTreeView can result in new items either being inserted as children of the item specified by row, column, and parent, or as siblings of the item.

When row and column are -1 it means that the dropped data should be considered as dropped directly on parent. Usually this will mean appending the data as child items of parent. If row and column are greater than or equal zero, it means that the drop occurred just before the specified row and column in the specified parent.

The mimeTypes() member is called to get the list of acceptable MIME types. This default implementation assumes the default implementation of mimeTypes(), which returns a single default MIME type. If you reimplement mimeTypes() in your custom model to return multiple MIME types, you must reimplement this function to make use of them.

See also: supportedDropActions(), canDropMimeData(), {Using drag and drop with item views}

Reimplemented in QAbstractTableModel, QAbstractListModel, QAbstractProxyModel, QConcatenateTablesProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QFileSystemModel, QStandardItemModel, DragDropListModel, QTableModel, and QTreeModel.

Definition at line 2198 of file qabstractitemmodel.cpp.

References QString::at(), Qt::CopyAction, QByteArray::data(), decodeData(), encoded, mimeTypes(), Qt::MoveAction, parent, QIODeviceBase::ReadOnly, and rowCount().

Referenced by QConcatenateTablesProxyModel::dropMimeData(), and QStandardItemModel::dropMimeData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ encodeData()

void QAbstractItemModel::encodeData	(	const QModelIndexList &	indexes,
		QDataStream &	stream
	)		const

protected

Definition at line 2741 of file qabstractitemmodel.cpp.

References itemData().

Referenced by mimeData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endInsertColumns()

void QAbstractItemModel::endInsertColumns ( )

protected

Ends a column insertion operation.

When reimplementing insertColumns() in a subclass, you must call this function after inserting data into the model's underlying data store.

See also: beginInsertColumns()

Definition at line 3204 of file qabstractitemmodel.cpp.

References columnsInserted(), d, emit, QAbstractItemModelPrivate::Change::first, QAbstractItemModelPrivate::Change::last, and QAbstractItemModelPrivate::Change::parent.

Referenced by QSqlQueryModel::endInsertColumns(), QTreeModel::insertColumns(), QTableModel::insertColumns(), TableModel::insertColumns(), QTreeModel::setColumnCount(), QTransposeProxyModel::setSourceModel(), and QtPrivate::QCalendarModel::setWeekNumbersShown().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endInsertRows()

void QAbstractItemModel::endInsertRows ( )

protected

Ends a row insertion operation.

When reimplementing insertRows() in a subclass, you must call this function after inserting data into the model's underlying data store.

See also: beginInsertRows()

Definition at line 2893 of file qabstractitemmodel.cpp.

References d, emit, QAbstractItemModelPrivate::Change::first, QAbstractItemModelPrivate::Change::last, QAbstractItemModelPrivate::Change::parent, and rowsInserted().

Referenced by QConcatenateTablesProxyModel::addSourceModel(), QTreeModel::endInsertItems(), QSqlQueryModel::endInsertRows(), QListModel::insert(), QListModel::insert(), TableModel::insertRows(), QTreeModel::insertRows(), QStringListModel::insertRows(), QListModel::insertRows(), QTableModel::insertRows(), QtPrivate::QCalendarModel::setHorizontalHeaderFormat(), QTransposeProxyModel::setSourceModel(), QQmlTreeModelToTableModel::showModelChildItems(), and ListModel::sync().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endMoveColumns()

void QAbstractItemModel::endMoveColumns ( )

protected

Ends a column move operation.

When implementing a subclass, you must call this function after moving data within the model's underlying data store.

See also: beginMoveColumns()

Since: 4.6

Definition at line 3340 of file qabstractitemmodel.cpp.

References QModelIndex::column(), columnsMoved(), createIndex(), d, emit, QAbstractItemModelPrivate::Change::first, Qt::Horizontal, QModelIndex::internalPointer(), QAbstractItemModelPrivate::Change::last, QAbstractItemModelPrivate::Change::needsAdjust, QAbstractItemModelPrivate::Change::parent, and QModelIndex::row().

Referenced by QTransposeProxyModel::setSourceModel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endMoveRows()

void QAbstractItemModel::endMoveRows ( )

protected

Ends a row move operation.

When implementing a subclass, you must call this function after moving data within the model's underlying data store.

See also: beginMoveRows()

Since: 4.6

Definition at line 3121 of file qabstractitemmodel.cpp.

References QModelIndex::column(), createIndex(), d, emit, QAbstractItemModelPrivate::Change::first, QModelIndex::internalPointer(), QAbstractItemModelPrivate::Change::last, QAbstractItemModelPrivate::Change::needsAdjust, QAbstractItemModelPrivate::Change::parent, QModelIndex::row(), rowsMoved(), and Qt::Vertical.

Referenced by QQmlListModel::move(), QListModel::move(), QQmlTableModel::moveRow(), QStringListModel::moveRows(), QListModel::moveRows(), QTransposeProxyModel::setSourceModel(), and ListModel::sync().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endRemoveColumns()

void QAbstractItemModel::endRemoveColumns ( )

protected

Ends a column removal operation.

When reimplementing removeColumns() in a subclass, you must call this function after removing data from the model's underlying data store.

See also: beginRemoveColumns()

Definition at line 3259 of file qabstractitemmodel.cpp.

References columnsRemoved(), d, emit, QAbstractItemModelPrivate::Change::first, QAbstractItemModelPrivate::Change::last, and QAbstractItemModelPrivate::Change::parent.

Referenced by QSqlQueryModel::endRemoveColumns(), QTableModel::removeColumns(), TableModel::removeColumns(), QTreeModel::setColumnCount(), QTransposeProxyModel::setSourceModel(), and QtPrivate::QCalendarModel::setWeekNumbersShown().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endRemoveRows()

void QAbstractItemModel::endRemoveRows ( )

protected

Ends a row removal operation.

When reimplementing removeRows() in a subclass, you must call this function after removing data from the model's underlying data store.

See also: beginRemoveRows()

Definition at line 2948 of file qabstractitemmodel.cpp.

References d, emit, QAbstractItemModelPrivate::Change::first, QAbstractItemModelPrivate::Change::last, QAbstractItemModelPrivate::Change::parent, and rowsRemoved().

Referenced by QTreeModel::endRemoveItems(), QSqlQueryModel::endRemoveRows(), QListModel::remove(), QQmlTableModel::removeRow(), TableModel::removeRows(), QStringListModel::removeRows(), QTreeModel::removeRows(), QListModel::removeRows(), QTableModel::removeRows(), QConcatenateTablesProxyModel::removeSourceModel(), QQmlTreeModelToTableModel::removeVisibleRows(), QtPrivate::QCalendarModel::setHorizontalHeaderFormat(), QTransposeProxyModel::setSourceModel(), ListModel::sync(), and QListModel::take().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ endResetModel()

void QAbstractItemModel::endResetModel ( )

protected

Completes a model reset operation.

You must call this function after resetting any internal data structure in your model or proxy model.

This function emits the signal modelReset().

See also: beginResetModel()

Since: 4.6

Definition at line 3400 of file qabstractitemmodel.cpp.

References d, emit, modelReset(), and resetInternalData().

Referenced by QPdfPageModel::QPdfPageModel(), QStandardItemModel::clear(), QListModel::clear(), QTreeModel::clear(), QTableModel::clearContents(), QQmlTreeModelToTableModel::clearModelData(), QSqlQueryModel::endResetModel(), QCompletionModel::filter(), QDeclarativePlaceContentModel::initializeCollection(), QDeclarativeSearchModelBase::initializePlugin(), QDeclarativeSearchSuggestionModel::queryFinished(), QDeclarativeGeocodeModel::reset(), QDeclarativeGeoRouteModel::reset(), QDeclarativeSearchModelBase::reset(), QCompletionModel::setFiltered(), QQuickFolderListModel::setFolder(), QQuick3DRenderStatsMeshesModel::setMeshData(), QHeaderDataProxyModel::setOrientation(), QQuick3DRenderStatsPassesModel::setPassData(), QDeclarativePlaceContentModel::setPlace(), QPdfSearchModel::setSearchString(), QHeaderDataProxyModel::setSourceModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QStringListModel::setStringList(), and QQuick3DRenderStatsTexturesModel::setTextureData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ fetchMore()

void QAbstractItemModel::fetchMore ( const QModelIndex & parent )

virtual

Fetches any available data for the items with the parent specified by the parent index.

Reimplement this if you are populating your model incrementally.

The default implementation does nothing.

See also: canFetchMore()

Reimplemented in QAbstractProxyModel, QSortFilterProxyModel, QFileSystemModel, QDeclarativePlaceContentModel, and QSqlQueryModel.

Definition at line 2412 of file qabstractitemmodel.cpp.

Referenced by QTreeViewPrivate::expand(), QQmlTreeModelToTableModel::expandPendingRows(), QAbstractItemViewPrivate::fetchMore(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QQmlTreeModelToTableModel::showModelChildItems(), and QQmlTreeModelToTableModel::showModelTopLevelItems().

Here is the caller graph for this function:

◆ flags()

Qt::ItemFlags QAbstractItemModel::flags ( const QModelIndex & index ) const

virtual

Returns the item flags for the given index.

The base class implementation returns a combination of flags that enables the item (ItemIsEnabled) and allows it to be selected (ItemIsSelectable).

See also: Qt::ItemFlags

Reimplemented in QAbstractTableModel, QAbstractListModel, QAbstractProxyModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, QStringListModel, QFileSystemModel, QStandardItemModel, QSqlTableModel, QUrlModel, TableModel, DragDropListModel, StringListModel, QListModel, QTableModel, QTreeModel, QtPrivate::QCalendarModel, QQmlTableModel, and QQmlTreeModelToTableModel.

Definition at line 2442 of file qabstractitemmodel.cpp.

References d, Qt::ItemIsEnabled, and Qt::ItemIsSelectable.

Referenced by QQuickTableViewPrivate::canEdit(), QTableViewPrivate::drawCell(), QAbstractTableModel::flags(), QAbstractListModel::flags(), QConcatenateTablesProxyModel::flags(), QFileSystemModel::flags(), QSqlTableModel::flags(), QQmlTreeModelToTableModel::flags(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QListView::paintEvent(), and QAbstractItemViewPrivate::shouldEdit().

Here is the caller graph for this function:

◆ hasChildren()

bool QAbstractItemModel::hasChildren ( const QModelIndex & parent = QModelIndex() ) const

virtual

Returns {true} if parent has any children; otherwise returns {false}.

Use rowCount() on the parent to find out the number of children.

Note that it is undefined behavior to report that a particular index hasChildren with this method if the same index has the flag Qt::ItemNeverHasChildren set.

See also: parent(), index()

Reimplemented in QEmptyItemModel, QAbstractTableModel, QAbstractListModel, QTreeModel, QQmlTreeModelToTableModel, QAbstractProxyModel, QSortFilterProxyModel, QFileSystemModel, QStandardItemModel, QCompletionModel, and QHeaderDataProxyModel.

Definition at line 1968 of file qabstractitemmodel.cpp.

References columnCount(), parent, and rowCount().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ hasIndex()

bool QAbstractItemModel::hasIndex	(	int	row,
		int	column,
		const QModelIndex &	parent = `QModelIndex()`
	)		const

Returns {true} if the model returns a valid QModelIndex for row and column with parent, otherwise returns {false}.

Definition at line 1950 of file qabstractitemmodel.cpp.

References columnCount(), parent, and rowCount().

Referenced by QHeaderDataProxyModel::data(), QAbstractTableModel::dropMimeData(), QAbstractListModel::dropMimeData(), QAbstractItemModelTesterPrivate::hasIndex(), QAbstractTableModel::index(), QConcatenateTablesProxyModel::index(), QQmlTreeModelToTableModel::index(), QHeaderDataProxyModel::index(), QPdfBookmarkModel::index(), QAbstractListModel::index(), QListModel::index(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QAbstractItemModelTesterPrivate::parent(), and QHeaderDataProxyModel::setData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ headerData()

QVariant QAbstractItemModel::headerData	(	int	section,
		Qt::Orientation	orientation,
		int	role = `Qt::DisplayRole`
	)		const

virtual

Returns the data for the given role and section in the header with the specified orientation.

For horizontal headers, the section number corresponds to the column number. Similarly, for vertical headers, the section number corresponds to the row number.

See also: Qt::ItemDataRole, setHeaderData(), QHeaderView

Reimplemented in QTableModel, QTreeModel, QQmlTreeModelToTableModel, QQuick3DRenderStatsMeshesModel, QQuick3DRenderStatsPassesModel, QQuick3DRenderStatsTexturesModel, QAbstractProxyModel, QConcatenateTablesProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QTransposeProxyModel, QFileSystemModel, QStandardItemModel, QSqlQueryModel, QSqlTableModel, TableModel, and StringListModel.

Definition at line 2682 of file qabstractitemmodel.cpp.

References Qt::DisplayRole, and Q_UNUSED.

Referenced by QHeaderDataProxyModel::data(), QHeaderViewPrivate::defaultSortOrderForSection(), QQmlTreeModelToTableModel::headerData(), QFileSystemModel::headerData(), QStandardItemModel::headerData(), QSqlQueryModel::headerData(), QFileDialogPrivate::retranslateStrings(), and QHeaderViewPrivate::setupSectionIndicator().

Here is the caller graph for this function:

◆ headerDataChanged

void QAbstractItemModel::headerDataChanged	(	Qt::Orientation	orientation,
		int	first,
		int	last
	)

signal

This signal is emitted whenever a header is changed.

The orientation indicates whether the horizontal or vertical header has changed. The sections in the header from the first to the last need to be updated.

When reimplementing the setHeaderData() function, this signal must be emitted explicitly.

If you are changing the number of columns or rows you do not need to emit this signal, but use the begin/end functions (refer to the section on subclassing in the QAbstractItemModel class description for details).

See also: headerData(), setHeaderData(), dataChanged()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QTreeModel::emitDataChanged(), emitHeaderDataChanged(), QtPrivate::QCalendarModel::internalUpdate(), QTableModel::itemChanged(), QTableModel::removeItem(), QSqlTableModel::removeRows(), QSqlTableModel::selectRow(), QSqlQueryModel::setHeaderData(), QStandardItemModel::setHorizontalHeaderItem(), QTableModel::setHorizontalHeaderItem(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QStandardItemModel::setVerticalHeaderItem(), and QTableModel::setVerticalHeaderItem().

Here is the caller graph for this function:

◆ index()

QModelIndex QAbstractItemModel::index	(	int	row,
		int	column,
		const QModelIndex &	parent = `QModelIndex()`
	)		const

pure virtual

Returns the index of the item in the model specified by the given row, column and parent index.

When reimplementing this function in a subclass, call createIndex() to generate model indexes that other components can use to refer to items in your model.

See also: createIndex()

Implemented in QCompletionModel, QTreeModel, QQmlListModel, QQmlXmlListModel, QDeclarativeSupportedCategoriesModel, QAbstractTableModel, QConcatenateTablesProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QTransposeProxyModel, QFileSystemModel, QStandardItemModel, QTableModel, QUndoModel, QQuickFolderListModel, QQmlTableModel, QQmlTreeModelToTableModel, QHeaderDataProxyModel, QPdfBookmarkModel, QAbstractListModel, QListModel, and QEmptyItemModel.

Referenced by QAbstractItemViewPrivate::_q_columnsAboutToBeRemoved(), QHeaderViewPrivate::_q_sectionsAboutToBeChanged(), QFileDialogPrivate::_q_useNameFilter(), QCommonListViewBase::appendHiddenRow(), QTableWidget::cellWidget(), QQmlTreeModelToTableModel::collapseRecursively(), QQmlTreeModelToTableModel::collapseRow(), QAbstractItemModelTesterPrivate::columnsAboutToBeInserted(), QAbstractItemModelTesterPrivate::columnsAboutToBeRemoved(), QAbstractItemModelTesterPrivate::data(), QTableViewPrivate::drawAndClipSpans(), QTableWidget::dropMimeData(), QQmlTreeModelToTableModel::expandRecursively(), QAbstractItemViewPrivate::fetchMore(), QTableWidget::findItems(), QAbstractItemModelTesterPrivate::index(), QDataWidgetMapperPrivate::indexAt(), QItemSelectionRange::intersected(), QAbstractItemViewPrivate::intersectedRect(), QTreeViewPrivate::intersectedRect(), QItemSelectionRange::isEmpty(), QListViewPrivate::itemSize(), QAbstractItemModelTesterPrivate::layoutAboutToBeChanged(), QAbstractItemModelTesterPrivate::layoutChanged(), QQmlTreeModelToTableModel::mapToModel(), QCommonListViewBase::modelIndex(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QSortFilterProxyModelLessThan::operator()(), QSortFilterProxyModelGreaterThan::operator()(), QAbstractItemModelTesterPrivate::parent(), QCommonListViewBase::removeHiddenRow(), QAbstractItemModelTesterPrivate::rowAndColumnCount(), QAbstractItemModelTesterPrivate::rowsAboutToBeInserted(), QAbstractItemModelTesterPrivate::rowsAboutToBeRemoved(), QAbstractItemModelTesterPrivate::rowsInserted(), QAbstractItemModelTesterPrivate::rowsRemoved(), QTreeViewPrivate::select(), QAbstractItemViewPrivate::selectAll(), QListViewPrivate::selectAll(), QTableViewPrivate::selectColumn(), QItemSelectionModel::selectedColumns(), QTableViewPrivate::selectRow(), QSidebar::selectUrl(), QTableWidget::setCellWidget(), QInputDialogPrivate::setListViewText(), QTableWidget::setRangeSelected(), QQmlTreeModelToTableModel::showModelChildItems(), QFileDialogComboBox::showPopup(), QQmlTreeModelToTableModel::testConsistency(), QTableViewPrivate::trimHiddenSelections(), QComboBoxPrivate::trySetValidIndex(), and QQuickTableViewPrivate::updateSelection().

◆ itemData()

QMap< int, QVariant > QAbstractItemModel::itemData ( const QModelIndex & index ) const

virtual

Returns a map with values for all predefined roles in the model for the item at the given index.

Reimplement this function if you want to extend the default behavior of this function to include custom roles in the map.

See also: Qt::ItemDataRole, data()

Reimplemented in QAbstractProxyModel, QStringListModel, QTransposeProxyModel, QStandardItemModel, QListModel, QTableModel, QTreeModel, and QConcatenateTablesProxyModel.

Definition at line 2002 of file qabstractitemmodel.cpp.

References i, QMap< Key, T >::insert(), QVariant::isValid(), and Qt::UserRole.

Referenced by QAbstractItemViewPrivate::clearOrRemove(), encodeData(), and QConcatenateTablesProxyModel::itemData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ layoutAboutToBeChanged

void QAbstractItemModel::layoutAboutToBeChanged	(	const QList< QPersistentModelIndex > &	parents = `QList<QPersistentModelIndex>()`,
		QAbstractItemModel::LayoutChangeHint	hint = `QAbstractItemModel::NoLayoutChangeHint`
	)

signal

Since: 5.0

This signal is emitted just before the layout of a model is changed. Components connected to this signal use it to adapt to changes in the model's layout.

Subclasses should update any persistent model indexes after emitting layoutAboutToBeChanged().

The optional parents parameter is used to give a more specific notification about what parts of the layout of the model are changing. An empty list indicates a change to the layout of the entire model. The order of elements in the parents list is not significant. The optional hint parameter is used to give a hint about what is happening while the model is relayouting.

See also: layoutChanged(), changePersistentIndex()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QListModel::ensureSorted(), QTableModel::ensureSorted(), QTreeModel::ensureSorted(), QSortFilterProxyModel::invalidate(), QStandardItemPrivate::setChild(), QTableModel::setItem(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QListModel::sort(), QTableModel::sort(), QStringListModel::sort(), and QFileSystemModel::sort().

Here is the caller graph for this function:

◆ layoutChanged

void QAbstractItemModel::layoutChanged	(	const QList< QPersistentModelIndex > &	parents = `QList<QPersistentModelIndex>()`,
		QAbstractItemModel::LayoutChangeHint	hint = `QAbstractItemModel::NoLayoutChangeHint`
	)

signal

Since: 5.0

This signal is emitted whenever the layout of items exposed by the model has changed; for example, when the model has been sorted. When this signal is received by a view, it should update the layout of items to reflect this change.

When subclassing QAbstractItemModel or QAbstractProxyModel, ensure that you emit layoutAboutToBeChanged() before changing the order of items or altering the structure of the data you expose to views, and emit layoutChanged() after changing the layout.

The optional parents parameter is used to give a more specific notification about what parts of the layout of the model are changing. An empty list indicates a change to the layout of the entire model. The order of elements in the parents list is not significant. The optional hint parameter is used to give a hint about what is happening while the model is relayouting.

Subclasses should update any persistent model indexes before emitting layoutChanged(). In other words, when the structure changes:

\list

emit layoutAboutToBeChanged
Remember the QModelIndex that will change
Update your internal data
Call changePersistentIndex()
emit layoutChanged \endlist

See also: layoutAboutToBeChanged(), dataChanged(), headerDataChanged(), modelReset(), changePersistentIndex()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), QListModel::ensureSorted(), QTableModel::ensureSorted(), QTreeModel::ensureSorted(), QSortFilterProxyModel::invalidate(), QStandardItemPrivate::setChild(), QTableModel::setItem(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), QCompletionModel::setSourceModel(), QListModel::sort(), QTableModel::sort(), QStringListModel::sort(), and QFileSystemModel::sort().

Here is the caller graph for this function:

◆ match()

QModelIndexList QAbstractItemModel::match	(	const QModelIndex &	start,
		int	role,
		const QVariant &	value,
		int	hits = `1`,
		Qt::MatchFlags	flags = `Qt::MatchFlags(Qt::MatchStartsWith\|Qt::MatchWrap)`
	)		const

virtual

Returns a list of indexes for the items in the column of the start index where data stored under the given role matches the specified value.

The way the search is performed is defined by the flags given. The list that is returned may be empty. Note also that the order of results in the list may not correspond to the order in the model, if for example a proxy model is used. The order of the results cannot be relied upon.

The search begins from the start index, and continues until the number of matching data items equals hits, the search reaches the last row, or the search reaches start again - depending on whether MatchWrap is specified in flags. If you want to search for all matching items, use hits = -1.

By default, this function will perform a wrapping, string-based comparison on all items, searching for items that begin with the search term specified by value.

Note: The default implementation of this function only searches columns. Reimplement this function to include a different search behavior.

Reimplemented in QIdentityProxyModel, and QSortFilterProxyModel.

Definition at line 2498 of file qabstractitemmodel.cpp.

References Qt::CaseInsensitive, QRegularExpression::CaseInsensitiveOption, Qt::CaseSensitive, hasChildren(), i, QString::isEmpty(), QModelIndex::isValid(), match(), Qt::MatchCaseSensitive, Qt::MatchContains, Qt::MatchEndsWith, Qt::MatchExactly, Qt::MatchFixedString, Qt::MatchRecursive, Qt::MatchRegularExpression, Qt::MatchStartsWith, Qt::MatchTypeMask, Qt::MatchWildcard, Qt::MatchWrap, QRegularExpression::NonPathWildcardConversion, parent, Q_FALLTHROUGH, QModelIndex::row(), rowCount(), rx(), QModelIndex::sibling(), text, toInt(), QRegularExpression::wildcardToRegularExpression(), and wrap().

Referenced by QStandardItemModel::findItems(), match(), QSortFilterProxyModel::match(), and QAbstractItemModelTesterPrivate::nonDestructiveBasicTest().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ mimeData()

QMimeData * QAbstractItemModel::mimeData ( const QModelIndexList & indexes ) const

virtual

Returns an object that contains serialized items of data corresponding to the list of indexes specified.

The format used to describe the encoded data is obtained from the mimeTypes() function. This default implementation uses the default MIME type returned by the default implementation of mimeTypes(). If you reimplement mimeTypes() in your custom model to return more MIME types, reimplement this function to make use of them.

If the list of indexes is empty, or there are no supported MIME types, \nullptr is returned rather than a serialized empty list.

See also: mimeTypes(), dropMimeData()

Reimplemented in QAbstractProxyModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, QFileSystemModel, QStandardItemModel, QUrlModel, DragDropListModel, QListModel, QTableModel, and QTreeModel.

Definition at line 2121 of file qabstractitemmodel.cpp.

References QString::at(), encoded, encodeData(), mimeTypes(), QList< T >::size(), and QIODeviceBase::WriteOnly.

Referenced by QListModel::internalMimeData(), QTableModel::internalMimeData(), QTreeModel::internalMimeData(), and QStandardItemModel::mimeData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ mimeTypes()

QStringList QAbstractItemModel::mimeTypes ( ) const

virtual

Returns the list of allowed MIME types.

By default, the built-in models and views use an internal MIME type: {application/x-qabstractitemmodeldatalist}.

When implementing drag and drop support in a custom model, if you will return data in formats other than the default internal MIME type, reimplement this function to return your list of MIME types.

If you reimplement this function in your custom model, you must also reimplement the member functions that call it: mimeData() and dropMimeData().

See also: mimeData(), dropMimeData()

Reimplemented in QAbstractProxyModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, QFileSystemModel, QStandardItemModel, QUrlModel, DragDropListModel, QListModel, QTableModel, and QTreeModel.

Definition at line 2101 of file qabstractitemmodel.cpp.

References QStringLiteral.

Referenced by canDropMimeData(), dropMimeData(), QAbstractTableModel::dropMimeData(), QAbstractListModel::dropMimeData(), mimeData(), QStandardItemModel::mimeTypes(), and QAbstractItemModelTesterPrivate::nonDestructiveBasicTest().

Here is the caller graph for this function:

◆ modelAboutToBeReset

QAbstractItemModel::modelAboutToBeReset ( QPrivateSignal )

signal

Since: 4.2

This signal is emitted when beginResetModel() is called, before the model's internal state (e.g. persistent model indexes) has been invalidated.

See also: beginResetModel(), modelReset()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), beginResetModel(), QQmlDelegateModelPrivate::connectToAbstractItemModel(), QQmlDelegateModelPrivate::disconnectFromAbstractItemModel(), QQmlTableInstanceModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ modelReset

QAbstractItemModel::modelReset ( QPrivateSignal )

signal

Since: 4.1

This signal is emitted when endResetModel() is called, after the model's internal state (e.g. persistent model indexes) has been invalidated.

Note that if a model is reset it should be considered that all information previously retrieved from it is invalid. This includes but is not limited to the rowCount() and columnCount(), flags(), data retrieved through data(), and roleNames().

See also: endResetModel(), modelAboutToBeReset()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QSortFilterProxyModel::QSortFilterProxyModel(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endResetModel(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), and QCompletionModel::setSourceModel().

Here is the caller graph for this function:

◆ multiData()

void QAbstractItemModel::multiData	(	const QModelIndex &	index,
		QModelRoleDataSpan	roleDataSpan
	)		const

virtual

Since: 6.0

Fills the roleDataSpan with the requested data for the given index.

The default implementation will call simply data() for each role in the span. A subclass can reimplement this function to provide data to views more efficiently:

void MyModel::multiData(const QModelIndex &index, QModelRoleDataSpan roleDataSpan) const
{
    for (QModelRoleData &roleData : roleDataSpan) {
        int role = roleData.role();
 
        // ... obtain the data for index and role ...
 
        roleData.setData(result);
    }
}

In the snippet above, {index} is the same for the entire call. This means that accessing to the necessary data structures in order to retrieve the information for {index} can be done only once (hoisting the relevant code out of the loop).

The usage of QModelRoleData::setData(), or similarly QVariant::setValue(), is encouraged over constructing a QVariant separately and using a plain assignment operator; this is because the former allow to re-use the memory already allocated for the QVariant object stored inside a QModelRoleData, while the latter always allocates the new variant and then destroys the old one.

Note that views may call multiData() with spans that have been used in previous calls, and therefore may already contain some data. Therefore, it is imperative that if the model cannot return the data for a given role, then it must clear the data in the corresponding QModelRoleData object. This can be done by calling QModelRoleData::clearData(), or similarly by setting a default constructed QVariant, and so on. Failure to clear the data will result in the view believing that the "old" data is meant to be used for the corresponding role.

Finally, in order to avoid code duplication, a subclass may also decide to reimplement data() in terms of multiData(), by supplying a span of just one element:

QVariant MyModel::data(const QModelIndex &index, int role) const
{
    QModelRoleData roleData(role);
    multiData(index, roleData);
    return roleData.data();
}

Note: Models are not allowed to modify the roles in the span, or to rearrange the span elements. Doing so results in undefined behavior.; It is illegal to pass an invalid model index to this function.

See also: QModelRoleDataSpan, data()

Reimplemented in QStandardItemModel.

Definition at line 3666 of file qabstractitemmodel.cpp.

References checkIndex(), d, IndexIsValid, and Q_ASSERT.

Referenced by MyModel::data(), and QStandardItemModel::multiData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ parent() [1/2]

QObject * QObject::parent ( ) const

inline

Returns a pointer to the parent object.

See also: children()

Definition at line 311 of file qobject.h.

◆ parent() [2/2]

virtual Q_INVOKABLE QModelIndex QAbstractItemModel::parent ( const QModelIndex & child ) const

pure virtual

Implemented in QEmptyItemModel, QCompletionModel, QAbstractTableModel, QAbstractListModel, QIdentityProxyModel, QSortFilterProxyModel, QFileSystemModel, QStandardItemModel, QTreeModel, QUndoModel, QQmlTreeModelToTableModel, QHeaderDataProxyModel, QDeclarativeSupportedCategoriesModel, QConcatenateTablesProxyModel, QTransposeProxyModel, and QPdfBookmarkModel.

◆ persistentIndexList()

QModelIndexList QAbstractItemModel::persistentIndexList ( ) const

protected

Since: 4.2

Returns the list of indexes stored as persistent indexes in the model.

Definition at line 3474 of file qabstractitemmodel.cpp.

References d.

Referenced by QListModel::ensureSorted(), QTableModel::ensureSorted(), QTreeModel::ensureSorted(), QTableModel::setItem(), QFileSystemModel::setNameFilters(), QStringListModel::sort(), and QFileSystemModel::sort().

Here is the caller graph for this function:

◆ Q_REVISION() [1/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [2/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [3/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [4/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [5/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [6/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [7/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [8/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [9/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [10/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)		const &

◆ Q_REVISION() [11/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [12/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ Q_REVISION() [13/13]

Q_INVOKABLE QAbstractItemModel::Q_REVISION	(	6	,
		4
	)

◆ resetInternalData

void QAbstractItemModel::resetInternalData ( )

protectedvirtualslot

Since: 4.8

This slot is called just after the internal data of a model is cleared while it is being reset.

This slot is provided the convenience of subclasses of concrete proxy models, such as subclasses of QSortFilterProxyModel which maintain extra data.

class CustomDataProxy : public QSortFilterProxyModel
{
    Q_OBJECT
public:
    CustomDataProxy(QObject *parent)
      : QSortFilterProxyModel(parent)
    {
    }
 
    ...
 
    QVariant data(const QModelIndex &index, int role) override
    {
        if (role != Qt::BackgroundRole)
            return QSortFilterProxyModel::data(index, role);
 
        if (m_customData.contains(index.row()))
            return m_customData.value(index.row());
        return QSortFilterProxyModel::data(index, role);
    }
 
private slots:
    void resetInternalData()
    {
        m_customData.clear();
    }
 
private:
  QHash<int, QVariant> m_customData;
};

Note: Due to a mistake, this slot is missing in Qt 5.0.

See also: modelAboutToBeReset(), modelReset()

Definition at line 1145 of file qabstractitemmodel.cpp.

Referenced by endResetModel().

Here is the caller graph for this function:

◆ revert

void QAbstractItemModel::revert ( )

virtualslot

Lets the model know that it should discard cached information.

This function is typically used for row editing.

See also: submit()

Reimplemented in QAbstractProxyModel.

Definition at line 2666 of file qabstractitemmodel.cpp.

◆ roleNames()

QHash< int, QByteArray > QAbstractItemModel::roleNames ( ) const

virtual

Since: 4.6

Returns the model's role names.

The default role names set by Qt are:

\table \header

Qt Role
QML Role Name \row
Qt::DisplayRole
display \row
Qt::DecorationRole
decoration \row
Qt::EditRole
edit \row
Qt::ToolTipRole
toolTip \row
Qt::StatusTipRole
statusTip \row
Qt::WhatsThisRole
whatsThis \endtable

Reimplemented in QAbstractProxyModel, QFileSystemModel, QStandardItemModel, QSqlQueryModel, QQuickFolderListModel, QQmlTableModel, QQmlListModel, QQmlTreeModelToTableModel, QQmlXmlListModel, TableModel, QQuickCalendarModel, QQuickDayOfWeekModel, QQuickMonthModel, QQuickWeekNumberModel, QQuickViewTestUtils::QaimModel, QDeclarativeGeocodeModel, QDeclarativeGeoRouteModel, QDeclarativePlaceContentModel, QDeclarativeSearchResultModel, QDeclarativeSearchSuggestionModel, QDeclarativeSupportedCategoriesModel, QQuickPlaylist, QQuick3DRenderStatsMeshesModel, QQuick3DRenderStatsPassesModel, QQuick3DRenderStatsTexturesModel, InstanceModel, QPdfBookmarkModel, QPdfPageModel, QPdfLinkModel, and QPdfSearchModel.

Definition at line 2640 of file qabstractitemmodel.cpp.

References QAbstractItemModelPrivate::defaultRoleNames().

Referenced by QPdfBookmarkModel::QPdfBookmarkModel(), QPdfPageModel::QPdfPageModel(), VDMAbstractItemModelDataType::initializeMetaType(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QFileSystemModel::roleNames(), QQmlTreeModelToTableModel::roleNames(), QQuickViewTestUtils::QaimModel::roleNames(), QDeclarativeGeocodeModel::roleNames(), QDeclarativeGeoRouteModel::roleNames(), QDeclarativePlaceContentModel::roleNames(), QDeclarativeSearchResultModel::roleNames(), QDeclarativeSearchSuggestionModel::roleNames(), and QDeclarativeSupportedCategoriesModel::roleNames().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ rowCount()

int QAbstractItemModel::rowCount ( const QModelIndex & parent = QModelIndex() ) const

pure virtual

Returns the number of rows under the given parent.

When the parent is valid it means that rowCount is returning the number of children of parent.

Note: When implementing a table based model, rowCount() should return 0 when the parent is valid.

See also: columnCount()

Implemented in QEmptyItemModel, QQuickViewTestUtils::StressTestModel, TableModel, QPdfPageModel, QCompletionModel, QTreeModel, QtPrivate::QCalendarModel, QQmlListModel, QQmlXmlListModel, QDeclarativeGeocodeModel, QDeclarativeGeoRouteModel, QDeclarativePlaceContentModel, QDeclarativeSearchSuggestionModel, QDeclarativeSupportedCategoriesModel, QQuick3DRenderStatsMeshesModel, QQuick3DRenderStatsPassesModel, QQuick3DRenderStatsTexturesModel, InstanceModel, QPdfLinkModel, QPdfSearchModel, QConcatenateTablesProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QStringListModel, QTransposeProxyModel, QFileSystemModel, QStandardItemModel, QSqlQueryModel, QSqlTableModel, TableModel, StringListModel, QListModel, QTableModel, QUndoModel, QQuickFolderListModel, QQmlTableModel, QQmlTreeModelToTableModel, QQuickCalendarModel, QQuickDayOfWeekModel, QHeaderDataProxyModel, QQuickMonthModel, QQuickWeekNumberModel, QQuickViewTestUtils::QaimModel, QDeclarativeSearchResultModel, QQuickPlaylist, and QPdfBookmarkModel.

◆ rowsAboutToBeInserted

void QAbstractItemModel::rowsAboutToBeInserted	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted just before rows are inserted into the model.

The new items will be positioned between start and end inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: insertRows(), beginInsertRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), beginInsertRows(), QStandardItemPrivate::insertRows(), QStandardItemPrivate::insertRows(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ rowsAboutToBeMoved

void QAbstractItemModel::rowsAboutToBeMoved	(	const QModelIndex &	sourceParent,
		int	sourceStart,
		int	sourceEnd,
		const QModelIndex &	destinationParent,
		int	destinationRow,
		QPrivateSignal
	)

signal

Since: 4.6

This signal is emitted just before rows are moved within the model. The items that will be moved are those between sourceStart and sourceEnd inclusive, under the given sourceParent item. They will be moved to destinationParent starting at the row destinationRow.

{Note:} Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: beginMoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), beginMoveRows(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ rowsAboutToBeRemoved

void QAbstractItemModel::rowsAboutToBeRemoved	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted just before rows are removed from the model.

The items that will be removed are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: removeRows(), beginRemoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), beginRemoveRows(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ rowsInserted

void QAbstractItemModel::rowsInserted	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted after rows have been inserted into the model.

The new items are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: insertRows(), beginInsertRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endInsertRows(), QStandardItemPrivate::insertRows(), QStandardItemPrivate::insertRows(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ rowsMoved

void QAbstractItemModel::rowsMoved	(	const QModelIndex &	sourceParent,
		int	sourceStart,
		int	sourceEnd,
		const QModelIndex &	destinationParent,
		int	destinationRow,
		QPrivateSignal
	)

signal

Since: 4.6

This signal is emitted after rows have been moved within the model. The items between sourceStart and sourceEnd inclusive, under the given sourceParent item have been moved to destinationParent starting at the row destinationRow.

{Note:} Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: beginMoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endMoveRows(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), and QSortFilterProxyModel::setSourceModel().

Here is the caller graph for this function:

◆ rowsRemoved

void QAbstractItemModel::rowsRemoved	(	const QModelIndex &	parent,
		int	first,
		int	last,
		QPrivateSignal
	)

signal

This signal is emitted after rows have been removed from the model.

The removed items are those between first and last inclusive, under the given parent item.

Note: Components connected to this signal use it to adapt to changes in the model's dimensions. It can only be emitted by the QAbstractItemModel implementation, and cannot be explicitly emitted in subclass code.

See also: removeRows(), beginRemoveRows()

Referenced by QAbstractItemModelTester::QAbstractItemModelTester(), QConcatenateTablesProxyModel::addSourceModel(), QQuickTableViewPrivate::connectToModel(), QQuickTableViewPrivate::disconnectFromModel(), endRemoveRows(), QConcatenateTablesProxyModel::removeSourceModel(), QUrlModel::setFileSystemModel(), QQmlTreeModelToTableModel::setModel(), QTransposeProxyModel::setSourceModel(), QAbstractProxyModel::setSourceModel(), QIdentityProxyModel::setSourceModel(), QSortFilterProxyModel::setSourceModel(), and QCompletionModel::setSourceModel().

Here is the caller graph for this function:

◆ setData()

bool QAbstractItemModel::setData	(	const QModelIndex &	index,
		const QVariant &	value,
		int	role = `Qt::EditRole`
	)

virtual

Sets the role data for the item at index to value.

Returns {true} if successful; otherwise returns {false}.

The dataChanged() signal should be emitted if the data was successfully set.

The base class implementation returns {false}. This function and data() must be reimplemented for editable models.

See also: Qt::ItemDataRole, data(), itemData()

Reimplemented in QListModel, QTableModel, QTreeModel, QQmlTreeModelToTableModel, QQmlTableModel, QAbstractProxyModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, QStringListModel, QFileSystemModel, QStandardItemModel, QSqlTableModel, QUrlModel, TableModel, StringListModel, QQmlListModel, QHeaderDataProxyModel, and QSqlRelationalTableModel.

Definition at line 2026 of file qabstractitemmodel.cpp.

References Q_UNUSED.

Referenced by QDataWidgetMapperPrivate::commit(), QItemDelegate::editorEvent(), QStyledItemDelegate::editorEvent(), QComboMenuDelegate::editorEvent(), main(), QQmlTreeModelToTableModel::setData(), QConcatenateTablesProxyModel::setData(), QSqlTableModel::setData(), setItemData(), QItemDelegate::setModelData(), QStyledItemDelegate::setModelData(), QComboBoxDelegate::setSeparator(), QFileDialogComboBox::showPopup(), sql_intro_snippets(), and MainWindow::updateSelection().

Here is the caller graph for this function:

◆ setHeaderData()

bool QAbstractItemModel::setHeaderData	(	int	section,
		Qt::Orientation	orientation,
		const QVariant &	value,
		int	role = `Qt::EditRole`
	)

virtual

Sets the data for the given role and section in the header with the specified orientation to the value supplied.

Returns {true} if the header's data was updated; otherwise returns {false}.

When reimplementing this function, the headerDataChanged() signal must be emitted explicitly.

See also: Qt::ItemDataRole, headerData()

Reimplemented in QTableModel, QTreeModel, QAbstractProxyModel, QSortFilterProxyModel, QTransposeProxyModel, QStandardItemModel, and QSqlQueryModel.

Definition at line 2702 of file qabstractitemmodel.cpp.

References Q_UNUSED.

Referenced by QHeaderDataProxyModel::setData().

Here is the caller graph for this function:

◆ setItemData()

bool QAbstractItemModel::setItemData	(	const QModelIndex &	index,
		const QMap< int, QVariant > &	roles
	)

virtual

Sets the role data for the item at index to the associated value in roles, for every Qt::ItemDataRole.

Returns {true} if successful; otherwise returns {false}.

Roles that are not in roles will not be modified.

See also: setData(), data(), itemData()

Reimplemented in QAbstractProxyModel, QConcatenateTablesProxyModel, QStringListModel, QTransposeProxyModel, QStandardItemModel, and QTableModel.

Definition at line 2071 of file qabstractitemmodel.cpp.

References QMap< Key, T >::begin(), e, QMap< Key, T >::end(), it, and setData().

Referenced by QAbstractItemViewPrivate::clearOrRemove(), decodeData(), QAbstractTableModel::dropMimeData(), QAbstractListModel::dropMimeData(), and QConcatenateTablesProxyModel::setItemData().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ sibling()

QModelIndex QAbstractItemModel::sibling	(	int	row,
		int	column,
		const QModelIndex &	index
	)		const

virtual

Returns the sibling at row and column for the item at index, or an invalid QModelIndex if there is no sibling at that location.

sibling() is just a convenience function that finds the item's parent, and uses it to retrieve the index of the child item in the specified row and column.

This method can optionally be overridden for implementation-specific optimization.

See also: index(), QModelIndex::row(), QModelIndex::column()

Reimplemented in QAbstractTableModel, QAbstractListModel, QAbstractProxyModel, QIdentityProxyModel, QSortFilterProxyModel, QStringListModel, QFileSystemModel, and QHeaderDataProxyModel.

Definition at line 1987 of file qabstractitemmodel.cpp.

References QModelIndex::column(), parent, and QModelIndex::row().

Referenced by QFileSystemModel::sibling().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ span()

QSize QAbstractItemModel::span ( const QModelIndex & index ) const

virtual

Returns the row and column span of the item represented by index.

Note: Currently, span is not used.

Reimplemented in QAbstractProxyModel, QConcatenateTablesProxyModel, QSortFilterProxyModel, and QTransposeProxyModel.

Definition at line 2604 of file qabstractitemmodel.cpp.

Referenced by QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), and QConcatenateTablesProxyModel::span().

Here is the caller graph for this function:

◆ submit

bool QAbstractItemModel::submit ( )

virtualslot

Lets the model know that it should submit cached information to permanent storage.

This function is typically used for row editing.

Returns {true} if there is no error; otherwise returns {false}.

See also: revert()

Reimplemented in QAbstractProxyModel.

Definition at line 2654 of file qabstractitemmodel.cpp.

◆ supportedDragActions()

Qt::DropActions QAbstractItemModel::supportedDragActions ( ) const

virtual

Returns the actions supported by the data in this model.

The default implementation returns supportedDropActions(). Reimplement this function if you wish to support additional actions.

supportedDragActions() is used by QAbstractItemView::startDrag() as the default values when a drag occurs.

See also: Qt::DropActions, {Using drag and drop with item views}

Reimplemented in QAbstractProxyModel.

Definition at line 2252 of file qabstractitemmodel.cpp.

References supportedDropActions().

Here is the call graph for this function:

◆ supportedDropActions()

Qt::DropActions QAbstractItemModel::supportedDropActions ( ) const

virtual

Since: 4.2

Returns the drop actions supported by this model.

The default implementation returns Qt::CopyAction. Reimplement this function if you wish to support additional actions. You must also reimplement the dropMimeData() function to handle the additional operations.

See also: dropMimeData(), Qt::DropActions, {Using drag and drop with item views}

Reimplemented in QAbstractProxyModel, QSortFilterProxyModel, QStringListModel, QFileSystemModel, QStandardItemModel, DragDropListModel, QTableModel, and QTreeModel.

Definition at line 2236 of file qabstractitemmodel.cpp.

References Qt::CopyAction.

Referenced by canDropMimeData(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), supportedDragActions(), and QStringListModel::supportedDropActions().

Here is the caller graph for this function:

Friends And Related Symbol Documentation

◆ QAbstractItemViewPrivate

friend class QAbstractItemViewPrivate

friend

Definition at line 238 of file qabstractitemmodel.h.

◆ QAbstractProxyModel

friend class QAbstractProxyModel

friend

Definition at line 239 of file qabstractitemmodel.h.

◆ QPersistentModelIndexData

friend class QPersistentModelIndexData

friend

Definition at line 237 of file qabstractitemmodel.h.

Member Data Documentation

◆ count [1/2]

Q_INVOKABLE int int QAbstractItemModel::count

Definition at line 276 of file qabstractitemmodel.h.

◆ count [2/2]

Q_INVOKABLE int int QAbstractItemModel::count

Definition at line 280 of file qabstractitemmodel.h.

◆ destinationChild [1/2]

Q_INVOKABLE int const QModelIndex int QAbstractItemModel::destinationChild

Definition at line 281 of file qabstractitemmodel.h.

Referenced by beginMoveColumns(), beginMoveRows(), QIdentityProxyModel::moveColumns(), QTransposeProxyModel::moveColumns(), QIdentityProxyModel::moveRows(), QStringListModel::moveRows(), QTransposeProxyModel::moveRows(), and QListModel::moveRows().

◆ destinationChild [2/2]

Q_INVOKABLE int const QModelIndex int QAbstractItemModel::destinationChild

Definition at line 290 of file qabstractitemmodel.h.

◆ destinationParent [1/2]

Q_INVOKABLE int const QModelIndex & QAbstractItemModel::destinationParent

Definition at line 281 of file qabstractitemmodel.h.

Referenced by beginMoveColumns(), beginMoveRows(), QIdentityProxyModel::moveColumns(), QTransposeProxyModel::moveColumns(), QIdentityProxyModel::moveRows(), QStringListModel::moveRows(), QTransposeProxyModel::moveRows(), and QListModel::moveRows().

◆ destinationParent [2/2]

Q_INVOKABLE int const QModelIndex& QAbstractItemModel::destinationParent

Definition at line 290 of file qabstractitemmodel.h.

◆ order

Q_INVOKABLE Qt::SortOrder QAbstractItemModel::order = Qt::AscendingOrder)

Definition at line 297 of file qabstractitemmodel.h.

Referenced by QSqlTableModel::setSort(), QSortFilterProxyModel::sort(), and QFileSystemModel::sort().

◆ parent [1/2]

Q_INVOKABLE const QModelIndex & QAbstractItemModel::parent = QModelIndex())

Returns the parent of the model item with the given index.

If the item has no parent, an invalid QModelIndex is returned.

A common convention used in models that expose tree data structures is that only items in the first column have children. For that case, when reimplementing this function in a subclass the column of the returned QModelIndex would be 0.

When reimplementing this function in a subclass, be careful to avoid calling QModelIndex member functions, such as QModelIndex::parent(), since indexes belonging to your model will simply call your implementation, leading to infinite recursion.

See also: createIndex()

Definition at line 276 of file qabstractitemmodel.h.

Referenced by QTreeModel::QTreeModel(), QTreeModel::QTreeModel(), QAbstractItemViewPrivate::_q_columnsAboutToBeRemoved(), beginInsertColumns(), QTreeModel::beginInsertItems(), beginInsertRows(), beginRemoveColumns(), QTreeModel::beginRemoveItems(), beginRemoveRows(), canDropMimeData(), QAbstractProxyModel::canDropMimeData(), QConcatenateTablesProxyModel::canDropMimeData(), QAbstractProxyModel::canFetchMore(), QDeclarativeSupportedCategoriesModel::columnCount(), QConcatenateTablesProxyModel::columnCount(), QTransposeProxyModel::columnCount(), QQmlTreeModelToTableModel::columnCount(), QHeaderDataProxyModel::columnCount(), QPdfBookmarkModel::columnCount(), decodeData(), dropMimeData(), QAbstractProxyModel::dropMimeData(), QConcatenateTablesProxyModel::dropMimeData(), QTreeModel::dropMimeData(), QTreeModel::ensureSorted(), QAbstractProxyModel::fetchMore(), QTreeModel::hasChildren(), hasChildren(), QAbstractProxyModel::hasChildren(), QCompletionModel::hasChildren(), QHeaderDataProxyModel::hasChildren(), hasIndex(), QCompletionModel::index(), QTreeModel::index(), QDeclarativeSupportedCategoriesModel::index(), QConcatenateTablesProxyModel::index(), QTransposeProxyModel::index(), QUndoModel::index(), QQmlTreeModelToTableModel::index(), QHeaderDataProxyModel::index(), QPdfBookmarkModel::index(), QTreeModel::insertColumns(), QTransposeProxyModel::insertColumns(), QTreeModel::insertRows(), QTransposeProxyModel::insertRows(), QQmlTreeModelToTableModel::lastChildIndex(), QCompletionModel::mapToSource(), match(), QAbstractItemModelTesterPrivate::nonDestructiveBasicTest(), QAbstractItemModelTesterPrivate::parent(), QTreeModel::parent(), QTransposeProxyModel::removeColumns(), QTransposeProxyModel::removeRows(), QTreeModel::removeRows(), QCompletionModel::rowCount(), QTreeModel::rowCount(), QDeclarativeSupportedCategoriesModel::rowCount(), QConcatenateTablesProxyModel::rowCount(), QTransposeProxyModel::rowCount(), QUndoModel::rowCount(), QHeaderDataProxyModel::rowCount(), QPdfBookmarkModel::rowCount(), QQmlTreeModelToTableModel::selectionForRowRange(), sibling(), and QQmlTreeModelToTableModel::testConsistency().

◆ parent [2/2]

Q_INVOKABLE const QModelIndex& QAbstractItemModel::parent = QModelIndex())

Definition at line 285 of file qabstractitemmodel.h.

◆ sourceColumn

Q_INVOKABLE int QAbstractItemModel::sourceColumn

Definition at line 282 of file qabstractitemmodel.h.

Referenced by QConcatenateTablesProxyModel::canDropMimeData(), QConcatenateTablesProxyModel::dropMimeData(), and QIdentityProxyModel::moveColumns().

◆ sourceRow

Q_INVOKABLE int QAbstractItemModel::sourceRow

Definition at line 280 of file qabstractitemmodel.h.

Referenced by QConcatenateTablesProxyModel::canDropMimeData(), QConcatenateTablesProxyModel::dropMimeData(), QTransposeProxyModel::moveColumns(), QIdentityProxyModel::moveRows(), QStringListModel::moveRows(), QTransposeProxyModel::moveRows(), QListModel::moveRows(), and QConcatenateTablesProxyModelPrivate::sourceModelForRow().

The documentation for this class was generated from the following files:

qtbase/src/corelib/itemmodels/qabstractitemmodel.h
qtbase/src/corelib/itemmodels/qabstractitemmodel.cpp

Public Types

Public Slots

Signals

Public Member Functions

Public Attributes

Protected Slots

Protected Member Functions

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ CheckIndexOption

◆ LayoutChangeHint

Constructor & Destructor Documentation

◆ QAbstractItemModel() [1/2]

◆ ~QAbstractItemModel()

◆ QAbstractItemModel() [2/2]

Member Function Documentation

◆ beginInsertColumns()

◆ beginInsertRows()

◆ beginMoveColumns()

◆ beginMoveRows()

◆ beginRemoveColumns()

◆ beginRemoveRows()

◆ beginResetModel()

◆ buddy()

◆ canDropMimeData()

◆ canFetchMore()

◆ changePersistentIndex()

◆ changePersistentIndexList()

◆ checkIndex()

◆ clearItemData()

◆ columnCount()

◆ columnsAboutToBeInserted

◆ columnsAboutToBeMoved

◆ columnsAboutToBeRemoved

◆ columnsInserted

◆ columnsMoved

◆ columnsRemoved

◆ createIndex() [1/2]

◆ createIndex() [2/2]

◆ data()

◆ dataChanged

◆ decodeData()

◆ dropMimeData()

◆ encodeData()

◆ endInsertColumns()

◆ endInsertRows()

◆ endMoveColumns()

◆ endMoveRows()

◆ endRemoveColumns()

◆ endRemoveRows()

◆ endResetModel()

◆ fetchMore()

◆ flags()

◆ hasChildren()

◆ hasIndex()

◆ headerData()

◆ headerDataChanged

◆ index()

◆ itemData()

◆ layoutAboutToBeChanged

◆ layoutChanged

◆ match()

◆ mimeData()

◆ mimeTypes()

◆ modelAboutToBeReset

◆ modelReset

◆ multiData()

◆ parent() [1/2]

◆ parent() [2/2]

◆ persistentIndexList()

◆ Q_REVISION() [1/13]

◆ Q_REVISION() [2/13]

◆ Q_REVISION() [3/13]

◆ Q_REVISION() [4/13]

◆ Q_REVISION() [5/13]

◆ Q_REVISION() [6/13]

◆ Q_REVISION() [7/13]

◆ Q_REVISION() [8/13]