The QDBusServiceWatcher class allows the user to watch for a bus service change. More...

#include <qdbusservicewatcher.h>

Inheritance diagram for QDBusServiceWatcher:

Collaboration diagram for QDBusServiceWatcher:

Public Types
enum	WatchModeFlag { WatchForRegistration = 0x01 , WatchForUnregistration = 0x02 , WatchForOwnerChange = 0x03 }
	QDBusServiceWatcher supports three different watch modes, which are configured by this flag: More...

Signals
void	serviceRegistered (const QString &service)
	This signal is emitted whenever this object detects that the service serviceName became available on the bus.

void	serviceUnregistered (const QString &service)
	This signal is emitted whenever this object detects that the service serviceName was unregistered from the bus and is no longer available.

void	serviceOwnerChanged (const QString &service, const QString &oldOwner, const QString &newOwner)
	This signal is emitted whenever this object detects that there was a service ownership change relating to the serviceName service.

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QDBusServiceWatcher (QObject *parent=nullptr)
	Creates a QDBusServiceWatcher object.

	QDBusServiceWatcher (const QString &service, const QDBusConnection &connection, WatchMode watchMode=WatchForOwnerChange, QObject *parent=nullptr)
	Creates a QDBusServiceWatcher object and attaches it to the connection connection.

	~QDBusServiceWatcher ()
	Destroys the QDBusServiceWatcher object and releases any resources associated with it.

QStringList	watchedServices () const
	Returns the list of D-Bus services that are being watched.

void	setWatchedServices (const QStringList &services)
	Sets the list of D-Bus services being watched to be services.

void	addWatchedService (const QString &newService)
	Adds newService to the list of services to be watched by this object.

bool	removeWatchedService (const QString &service)
	Removes the service from the list of services being watched by this object.

QBindable< QStringList >	bindableWatchedServices ()

WatchMode	watchMode () const

void	setWatchMode (WatchMode mode)

QBindable< WatchMode >	bindableWatchMode ()

QDBusConnection	connection () const
	Returns the QDBusConnection that this object is attached to.

void	setConnection (const QDBusConnection &connection)
	Sets the D-Bus connection that this object is attached to be connection.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

void	moveToThread (QThread *thread)
	Changes the thread affinity for this object and its children.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

template<typename T >
T	findChild (const QString &aName=QString(), Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (const QString &aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Properties
QStringList	watchedServices
	the list of services watched.

WatchMode	watchMode
	the current watch mode for this QDBusServiceWatcher object.

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

The QDBusServiceWatcher class allows the user to watch for a bus service change.

Since: 4.6 \inmodule QtDBus

A QDBusServiceWatcher object can be used to notify the application about an ownership change of a service name on the bus. It has three watch modes:

\list

Watching for service registration only.
Watching for service unregistration only.
Watching for any kind of service ownership change (the default mode). \endlist

Besides being created or deleted, services may change owners without a unregister/register operation happening. So the serviceRegistered() and serviceUnregistered() signals may not be emitted if that happens.

This class is more efficient than using the QDBusConnectionInterface::serviceOwnerChanged() signal because it allows one to receive only the signals for which the class is interested in.

Ending a service name with the character '*' will match all service names within the specified namespace.

For example "com.example.backend1*" will match \list

com.example.backend1
com.example.backend1.foo
com.example.backend1.foo.bar \endlist Substrings in the same domain will not be matched, i.e "com.example.backend12".

See also: QDBusConnection

Definition at line 22 of file qdbusservicewatcher.h.

Member Enumeration Documentation

◆ WatchModeFlag

enum QDBusServiceWatcher::WatchModeFlag

QDBusServiceWatcher supports three different watch modes, which are configured by this flag:

\value WatchForRegistration watch for service registration only, ignoring any signals related to other service ownership change.

\value WatchForUnregistration watch for service unregistration only, ignoring any signals related to other service ownership change.

\value WatchForOwnerChange watch for any kind of service ownership change.

Enumerator
WatchForRegistration
WatchForUnregistration
WatchForOwnerChange

Definition at line 29 of file qdbusservicewatcher.h.

Constructor & Destructor Documentation

◆ QDBusServiceWatcher() [1/2]

QDBusServiceWatcher::QDBusServiceWatcher ( QObject * parent = nullptr )

explicit

Creates a QDBusServiceWatcher object.

Note that until you set a connection with setConnection(), this object will not emit any signals.

The parent parameter is passed to QObject to set the parent of this object.

Definition at line 212 of file qdbusservicewatcher.cpp.

◆ QDBusServiceWatcher() [2/2]

QDBusServiceWatcher::QDBusServiceWatcher	(	const QString &	service,
		const QDBusConnection &	connection,
		WatchMode	watchMode = `WatchForOwnerChange`,
		QObject *	parent = `nullptr`
	)

Creates a QDBusServiceWatcher object and attaches it to the connection connection.

Also, this function immediately starts watching for watchMode changes to service service.

The parent parameter is passed to QObject to set the parent of this object.

Definition at line 225 of file qdbusservicewatcher.cpp.

References connection(), and watchMode.

Here is the call graph for this function:

◆ ~QDBusServiceWatcher()

QDBusServiceWatcher::~QDBusServiceWatcher ( )

Destroys the QDBusServiceWatcher object and releases any resources associated with it.

Definition at line 235 of file qdbusservicewatcher.cpp.

Member Function Documentation

◆ addWatchedService()

void QDBusServiceWatcher::addWatchedService ( const QString & newService )

Adds newService to the list of services to be watched by this object.

This function is more efficient than setWatchedServices() and should be used whenever possible to add services.

Removes any existing binding of watchedServices.

Definition at line 282 of file qdbusservicewatcher.cpp.

References d.

Referenced by QIBusPlatformInputContextPrivate::createBusProxy().

Here is the caller graph for this function:

◆ bindableWatchedServices()

QBindable< QStringList > QDBusServiceWatcher::bindableWatchedServices ( )

Definition at line 269 of file qdbusservicewatcher.cpp.

References d.

◆ bindableWatchMode()

QBindable< QDBusServiceWatcher::WatchMode > QDBusServiceWatcher::bindableWatchMode ( )

Definition at line 329 of file qdbusservicewatcher.cpp.

◆ connection()

QDBusConnection QDBusServiceWatcher::connection ( ) const

Returns the QDBusConnection that this object is attached to.

See also: setConnection()

Definition at line 349 of file qdbusservicewatcher.cpp.

Referenced by QDBusServiceWatcher(), and setConnection().

Here is the caller graph for this function:

◆ removeWatchedService()

bool QDBusServiceWatcher::removeWatchedService ( const QString & service )

Removes the service from the list of services being watched by this object.

Note that D-Bus notifications are asynchronous, so there may still be signals pending delivery about service. Those signals will still be emitted whenever the D-Bus messages are processed.

Removes any existing binding of watchedServices.

This function returns true if any services were removed.

Definition at line 307 of file qdbusservicewatcher.cpp.

References d.

Referenced by QIBusPlatformInputContextPrivate::createBusProxy().

Here is the caller graph for this function:

◆ serviceOwnerChanged

void QDBusServiceWatcher::serviceOwnerChanged	(	const QString &	serviceName,
		const QString &	oldOwner,
		const QString &	newOwner
	)

signal

This signal is emitted whenever this object detects that there was a service ownership change relating to the serviceName service.

The oldOwner parameter contains the old owner name and newOwner is the new owner. Both oldOwner and newOwner are unique connection names.

Note that this signal is also emitted whenever the serviceName service was registered or unregistered. If it was registered, oldOwner will contain an empty string, whereas if it was unregistered, newOwner will contain an empty string.

If you need only to find out if the service is registered or unregistered only, without being notified that the ownership changed, consider using the specific modes for those operations. This class is more efficient if you use the more specific modes.

See also: serviceRegistered(), serviceUnregistered()

◆ serviceRegistered

void QDBusServiceWatcher::serviceRegistered ( const QString & serviceName )

signal

This signal is emitted whenever this object detects that the service serviceName became available on the bus.

See also: serviceUnregistered(), serviceOwnerChanged()

Referenced by QDBusTrayIcon::init().

Here is the caller graph for this function:

◆ serviceUnregistered

void QDBusServiceWatcher::serviceUnregistered ( const QString & serviceName )

signal

This signal is emitted whenever this object detects that the service serviceName was unregistered from the bus and is no longer available.

See also: serviceRegistered(), serviceOwnerChanged()

◆ setConnection()

void QDBusServiceWatcher::setConnection ( const QDBusConnection & connection )

Sets the D-Bus connection that this object is attached to be connection.

All services watched will be transferred to this connection.

Note that QDBusConnection objects are reference counted: QDBusServiceWatcher will keep a reference for this connection while it exists. The connection is not closed until the reference count drops to zero, so this will ensure that any notifications are received while this QDBusServiceWatcher object exists.

See also: connection()

Definition at line 366 of file qdbusservicewatcher.cpp.

References connection(), d, and QDBusConnection::name().

Referenced by QIBusPlatformInputContextPrivate::~QIBusPlatformInputContextPrivate(), QIBusPlatformInputContextPrivate::createBusProxy(), and QIBusPlatformInputContext::socketChanged().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setWatchedServices()

void QDBusServiceWatcher::setWatchedServices ( const QStringList & services )

Sets the list of D-Bus services being watched to be services.

Note that setting the entire list means removing all previous rules for watching services and adding new ones. This is an expensive operation and should be avoided, if possible. Instead, use addWatchedService() and removeWatchedService() if you can to manipulate entries in the list.

Removes any existing binding of watchedServices.

Definition at line 259 of file qdbusservicewatcher.cpp.

References d, and services.

◆ setWatchMode()

void QDBusServiceWatcher::setWatchMode ( WatchMode mode )

Definition at line 334 of file qdbusservicewatcher.cpp.

References d.

◆ watchedServices()

QStringList QDBusServiceWatcher::watchedServices ( ) const

Returns the list of D-Bus services that are being watched.

See also: setWatchedServices()

Definition at line 244 of file qdbusservicewatcher.cpp.

◆ watchMode()

QDBusServiceWatcher::WatchMode QDBusServiceWatcher::watchMode ( ) const

Definition at line 324 of file qdbusservicewatcher.cpp.

Property Documentation

◆ watchedServices

QDBusServiceWatcher::watchedServices

readwrite

the list of services watched.

Note: Modifying this list with setServicesWatched() is an expensive operation. If you can, prefer to change it by way of addWatchedService() and removeWatchedService().

Definition at line 68 of file qdbusservicewatcher.h.

◆ watchMode

QDBusServiceWatcher::watchMode

readwrite

the current watch mode for this QDBusServiceWatcher object.

The default value for this property is QDBusServiceWatcher::WatchForOwnershipChange.

Definition at line 68 of file qdbusservicewatcher.h.

Referenced by QDBusServiceWatcher().

The documentation for this class was generated from the following files:

qtbase/src/dbus/qdbusservicewatcher.h
qtbase/src/dbus/qdbusservicewatcher.cpp

Public Types

Signals

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ WatchModeFlag

Constructor & Destructor Documentation

◆ QDBusServiceWatcher() [1/2]

◆ QDBusServiceWatcher() [2/2]

◆ ~QDBusServiceWatcher()

Member Function Documentation

◆ addWatchedService()

◆ bindableWatchedServices()

◆ bindableWatchMode()

◆ connection()

◆ removeWatchedService()

◆ serviceOwnerChanged

◆ serviceRegistered

◆ serviceUnregistered

◆ setConnection()

◆ setWatchedServices()

◆ setWatchMode()

◆ watchedServices()

◆ watchMode()

Property Documentation

◆ watchedServices

◆ watchMode