#include <qgeomap_p.h>

Inheritance diagram for QGeoMap:

Collaboration diagram for QGeoMap:

Public Types
enum	ItemType { NoItem = 0x0000 , MapRectangle = 0x0001 , MapCircle = 0x0002 , MapPolyline = 0x0004 , MapPolygon = 0x0008 , MapQuickItem = 0x0010 , CustomMapItem = 0x8000 }

enum	Capability { SupportsNothing = 0x0000 , SupportsVisibleRegion = 0x0001 , SupportsSetBearing = 0x0002 , SupportsAnchoringCoordinate = 0x0004 , SupportsFittingViewportToGeoRectangle = 0x0008 , SupportsVisibleArea = 0x0010 }

Signals
void	cameraDataChanged (const QGeoCameraData &cameraData)

void	sgNodeChanged ()

void	activeMapTypeChanged ()

void	cameraCapabilitiesChanged (const QGeoCameraCapabilities &oldCameraCapabilities)

void	copyrightsImageChanged (const QImage &copyrightsImage)

void	copyrightsChanged (const QString &copyrightsHtml)

void	copyrightsStyleSheetChanged (const QString &styleSheet)

void	visibleAreaChanged ()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
virtual	~QGeoMap ()

void	setViewportSize (const QSize &viewportSize)

QSize	viewportSize () const

int	viewportWidth () const

int	viewportHeight () const

const QGeoCameraData &	cameraData () const

QGeoCameraCapabilities	cameraCapabilities () const

virtual Capabilities	capabilities () const

void	setActiveMapType (const QGeoMapType &mapType)

QGeoMapType	activeMapType () const

double	minimumZoom () const

double	maximumCenterLatitudeAtZoom (const QGeoCameraData &cameraData) const

double	minimumCenterLatitudeAtZoom (const QGeoCameraData &cameraData) const

double	mapWidth () const

double	mapHeight () const

const QGeoProjection &	geoProjection () const

virtual void	prefetchData ()

virtual void	clearData ()

ItemTypes	supportedMapItemTypes () const

void	addMapItem (QDeclarativeGeoMapItemBase *item)

void	removeMapItem (QDeclarativeGeoMapItemBase *item)

void	clearMapItems ()

virtual QString	copyrightsStyleSheet () const

virtual void	setAcceptedGestures (bool pan, bool flick, bool pinch, bool rotate, bool tilt)

virtual bool	handleEvent (QEvent *event)

virtual bool	setBearing (qreal bearing, const QGeoCoordinate &coordinate)

virtual QGeoShape	visibleRegion () const

virtual bool	anchorCoordinateToPoint (const QGeoCoordinate &coordinate, const QPointF &anchorPoint)

virtual bool	fitViewportToGeoRectangle (const QGeoRectangle &rectangle, const QMargins &borders)

virtual void	setCopyrightVisible (bool visible)

virtual void	setItemToWindowTransform (const QTransform &itemToWindowTransform)

void	setVisibleArea (const QRectF &visibleArea)

QRectF	visibleArea () const

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

void	moveToThread (QThread *thread)
	Changes the thread affinity for this object and its children.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::milliseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

template<typename T >
T	findChild (const QString &aName=QString(), Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (const QString &aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Protected Member Functions
	QGeoMap (QGeoMapPrivate &dd, QObject *parent=nullptr)

void	setCameraData (const QGeoCameraData &cameraData)

void	setCameraCapabilities (const QGeoCameraCapabilities &cameraCapabilities)

virtual QSGNode *	updateSceneGraph (QSGNode node, QQuickWindow window)=0

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Friends
class	QDeclarativeGeoMap

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Properties inherited from QObject
QString	objectName
	the name of this object

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 38 of file qgeomap_p.h.

Member Enumeration Documentation

◆ Capability

enum QGeoMap::Capability

Enumerator
SupportsNothing
SupportsVisibleRegion
SupportsSetBearing
SupportsAnchoringCoordinate
SupportsFittingViewportToGeoRectangle
SupportsVisibleArea

Definition at line 58 of file qgeomap_p.h.

◆ ItemType

enum QGeoMap::ItemType

Enumerator
NoItem
MapRectangle
MapCircle
MapPolyline
MapPolygon
MapQuickItem
CustomMapItem

Definition at line 46 of file qgeomap_p.h.

Constructor & Destructor Documentation

◆ ~QGeoMap()

QGeoMap::~QGeoMap ( )

virtual

Definition at line 19 of file qgeomap.cpp.

◆ QGeoMap()

QT_BEGIN_NAMESPACE QGeoMap::QGeoMap	(	QGeoMapPrivate &	dd,
		QObject *	parent = `nullptr`
	)

protected

Definition at line 14 of file qgeomap.cpp.

Member Function Documentation

◆ activeMapType()

QGeoMapType QGeoMap::activeMapType ( ) const

Definition at line 128 of file qgeomap.cpp.

References d.

Referenced by QGeoTiledMap::clearScene(), and QGeoTiledMapNokia::evaluateCopyrights().

Here is the caller graph for this function:

◆ activeMapTypeChanged

void QGeoMap::activeMapTypeChanged ( )

signal

Referenced by setActiveMapType().

Here is the caller graph for this function:

◆ addMapItem()

void QGeoMap::addMapItem ( QDeclarativeGeoMapItemBase * item )

Definition at line 197 of file qgeomap.cpp.

References d, and item.

Referenced by QDeclarativeGeoMap::addMapItem_real().

Here is the caller graph for this function:

◆ anchorCoordinateToPoint()

bool QGeoMap::anchorCoordinateToPoint	(	const QGeoCoordinate &	coordinate,
		const QPointF &	anchorPoint
	)

virtual

Definition at line 85 of file qgeomap.cpp.

References QGeoProjection::anchorCoordinateToPoint(), cameraData(), d, geoProjection(), QGeoCoordinate::latitude, qBound(), setCameraData(), and QGeoCoordinate::setLatitude().

Referenced by QDeclarativeGeoMap::alignCoordinateToPoint().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ cameraCapabilities()

QGeoCameraCapabilities QGeoMap::cameraCapabilities ( ) const

Definition at line 170 of file qgeomap.cpp.

References d.

Referenced by setCameraCapabilities().

Here is the caller graph for this function:

◆ cameraCapabilitiesChanged

void QGeoMap::cameraCapabilitiesChanged ( const QGeoCameraCapabilities & oldCameraCapabilities )

signal

Referenced by QGeoTiledMap::QGeoTiledMap(), and QGeoTiledMap::QGeoTiledMap().

Here is the caller graph for this function:

◆ cameraData()

const QGeoCameraData & QGeoMap::cameraData ( ) const

Definition at line 111 of file qgeomap.cpp.

References d.

Here is the caller graph for this function:

◆ cameraDataChanged

void QGeoMap::cameraDataChanged ( const QGeoCameraData & cameraData )

signal

Referenced by QDeclarativeGeoMap::initialize(), setCameraData(), and QDeclarativeGeoMapQuickItem::setMap().

Here is the caller graph for this function:

◆ capabilities()

QGeoMap::Capabilities QGeoMap::capabilities ( ) const

virtual

Reimplemented in QGeoTiledMap, QGeoMapItemsOverlay, and QGeoMapMapboxGL.

Definition at line 176 of file qgeomap.cpp.

References SupportsNothing.

Referenced by QDeclarativeGeoMap::alignCoordinateToPoint(), QDeclarativeGeoMap::setBearing(), and QDeclarativeGeoMap::visibleRegion().

Here is the caller graph for this function:

◆ clearData()

void QGeoMap::clearData ( )

virtual

Reimplemented in QGeoTiledMap.

Definition at line 186 of file qgeomap.cpp.

Referenced by QDeclarativeGeoMap::clearData().

Here is the caller graph for this function:

◆ clearMapItems()

void QGeoMap::clearMapItems ( )

Definition at line 215 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMap::~QDeclarativeGeoMap().

Here is the caller graph for this function:

◆ copyrightsChanged

void QGeoMap::copyrightsChanged ( const QString & copyrightsHtml )

signal

Referenced by QGeoMapMapboxGL::copyrightsChanged(), GeoTiledMapEsri::evaluateCopyrights(), and QGeoTiledMapOsm::onProviderDataUpdated().

Here is the caller graph for this function:

◆ copyrightsImageChanged

void QGeoMap::copyrightsImageChanged ( const QImage & copyrightsImage )

signal

Referenced by QGeoTiledMapNokia::evaluateCopyrights().

Here is the caller graph for this function:

◆ copyrightsStyleSheet()

QString QGeoMap::copyrightsStyleSheet ( ) const

virtual

Reimplemented in QGeoMapMapboxGL.

Definition at line 244 of file qgeomap.cpp.

References QStringLiteral.

Referenced by QDeclarativeGeoMapCopyrightNotice::connectMap().

Here is the caller graph for this function:

◆ copyrightsStyleSheetChanged

void QGeoMap::copyrightsStyleSheetChanged ( const QString & styleSheet )

signal

Referenced by QDeclarativeGeoMapCopyrightNotice::connectMap().

Here is the caller graph for this function:

◆ fitViewportToGeoRectangle()

bool QGeoMap::fitViewportToGeoRectangle	(	const QGeoRectangle &	rectangle,
		const QMargins &	borders
	)

virtual

Definition at line 99 of file qgeomap.cpp.

References Q_UNUSED.

◆ geoProjection()

const QGeoProjection & QGeoMap::geoProjection ( ) const

Definition at line 164 of file qgeomap.cpp.

References d.

Referenced by anchorCoordinateToPoint(), QDeclarativeGeoMap::fromCoordinate(), QDeclarativeCircleMapItem::geometryChange(), QDeclarativeGeoMapQuickItem::geometryChange(), QDeclarativePolygonMapItem::geometryChange(), QDeclarativePolylineMapItem::geometryChange(), QDeclarativeRectangleMapItem::geometryChange(), QDeclarativeGeoMap::pan(), QDeclarativePolylineMapItemPrivateCPU::regenerateCache(), setBearing(), QDeclarativeGeoMapItemBase::setPositionOnMap(), QDeclarativeGeoMap::toCoordinate(), QDeclarativePolylineMapItemPrivateCPU::updateCache(), QDeclarativeCircleMapItemPrivateCPU::updatePolish(), QDeclarativeGeoMapQuickItem::updatePolish(), visibleRegion(), and QDeclarativeGeoMap::visibleRegion().

Here is the caller graph for this function:

◆ handleEvent()

bool QGeoMap::handleEvent ( QEvent * event )

virtual

Definition at line 68 of file qgeomap.cpp.

References Q_UNUSED.

◆ mapHeight()

double QGeoMap::mapHeight ( ) const

Definition at line 158 of file qgeomap.cpp.

References d.

◆ mapWidth()

double QGeoMap::mapWidth ( ) const

Definition at line 152 of file qgeomap.cpp.

References d.

◆ maximumCenterLatitudeAtZoom()

double QGeoMap::maximumCenterLatitudeAtZoom ( const QGeoCameraData & cameraData ) const

Definition at line 140 of file qgeomap.cpp.

References cameraData(), and d.

Referenced by QDeclarativeGeoMap::geometryChange(), QDeclarativeGeoMap::initialize(), and QDeclarativeGeoMap::setZoomLevel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ minimumCenterLatitudeAtZoom()

double QGeoMap::minimumCenterLatitudeAtZoom ( const QGeoCameraData & cameraData ) const

Definition at line 146 of file qgeomap.cpp.

References cameraData(), and d.

Referenced by QDeclarativeGeoMap::geometryChange(), QDeclarativeGeoMap::initialize(), and QDeclarativeGeoMap::setZoomLevel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ minimumZoom()

double QGeoMap::minimumZoom ( ) const

Definition at line 134 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMap::geometryChange(), QDeclarativeGeoMap::initialize(), and QDeclarativeGeoMap::setZoomLevel().

Here is the caller graph for this function:

◆ prefetchData()

void QGeoMap::prefetchData ( )

virtual

Reimplemented in QGeoTiledMap.

Definition at line 181 of file qgeomap.cpp.

Referenced by QDeclarativeGeoMap::prefetchData().

Here is the caller graph for this function:

◆ removeMapItem()

void QGeoMap::removeMapItem ( QDeclarativeGeoMapItemBase * item )

Definition at line 206 of file qgeomap.cpp.

References d, and item.

Referenced by QDeclarativeGeoMap::removeMapItem_real().

Here is the caller graph for this function:

◆ setAcceptedGestures()

void QGeoMap::setAcceptedGestures	(	bool	pan,
		bool	flick,
		bool	pinch,
		bool	rotate,
		bool	tilt
	)

virtual

Definition at line 249 of file qgeomap.cpp.

References Q_UNUSED.

◆ setActiveMapType()

void QGeoMap::setActiveMapType ( const QGeoMapType & mapType )

Definition at line 117 of file qgeomap.cpp.

References activeMapTypeChanged(), d, and emit.

Referenced by QDeclarativeGeoMap::setActiveMapType().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setBearing()

bool QGeoMap::setBearing	(	qreal	bearing,
		const QGeoCoordinate &	coordinate
	)

virtual

Definition at line 74 of file qgeomap.cpp.

References cameraData(), d, geoProjection(), and setCameraData().

Referenced by QDeclarativeGeoMap::setBearing().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setCameraCapabilities()

void QGeoMap::setCameraCapabilities ( const QGeoCameraCapabilities & cameraCapabilities )

protected

Definition at line 62 of file qgeomap.cpp.

References cameraCapabilities(), and d.

Referenced by QGeoTiledMapOsm::onProviderDataUpdated().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setCameraData()

void QGeoMap::setCameraData ( const QGeoCameraData & cameraData )

protected

Definition at line 51 of file qgeomap.cpp.

References cameraData(), cameraDataChanged(), d, and emit.

Referenced by anchorCoordinateToPoint(), QDeclarativeGeoMap::geometryChange(), QDeclarativeGeoMap::initialize(), QDeclarativeGeoMap::setBearing(), setBearing(), QDeclarativeGeoMap::setCenter(), QDeclarativeGeoMap::setFieldOfView(), QDeclarativeGeoMap::setTilt(), and QDeclarativeGeoMap::setZoomLevel().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setCopyrightVisible()

void QGeoMap::setCopyrightVisible ( bool visible )

virtual

Reimplemented in QGeoTiledMap.

Definition at line 258 of file qgeomap.cpp.

References d.

Referenced by QGeoTiledMap::setCopyrightVisible().

Here is the caller graph for this function:

◆ setItemToWindowTransform()

void QGeoMap::setItemToWindowTransform ( const QTransform & itemToWindowTransform )

virtual

Definition at line 223 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMap::updateItemToWindowTransform().

Here is the caller graph for this function:

◆ setViewportSize()

void QGeoMap::setViewportSize ( const QSize & viewportSize )

Definition at line 23 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMap::geometryChange().

Here is the caller graph for this function:

◆ setVisibleArea()

void QGeoMap::setVisibleArea ( const QRectF & visibleArea )

Definition at line 229 of file qgeomap.cpp.

References d, emit, visibleArea(), and visibleAreaChanged().

Referenced by QDeclarativeGeoMap::initialize(), and QDeclarativeGeoMap::setVisibleArea().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ sgNodeChanged

void QGeoMap::sgNodeChanged ( )

signal

Referenced by QGeoMapMapboxGL::QGeoMapMapboxGL(), QSGMapboxGLRenderNode::QSGMapboxGLRenderNode(), QSGMapboxGLTextureNode::QSGMapboxGLTextureNode(), and QGeoTiledMap::clearData().

Here is the caller graph for this function:

◆ supportedMapItemTypes()

QGeoMap::ItemTypes QGeoMap::supportedMapItemTypes ( ) const

Definition at line 191 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMapItemBase::updatePaintNode().

Here is the caller graph for this function:

◆ updateSceneGraph()

virtual QSGNode * QGeoMap::updateSceneGraph	(	QSGNode *	node,
		QQuickWindow *	window
	)

protectedpure virtual

Implemented in QGeoTiledMap, QGeoMapItemsOverlay, and QGeoMapMapboxGL.

Referenced by QDeclarativeGeoMap::updatePaintNode().

Here is the caller graph for this function:

◆ viewportHeight()

int QGeoMap::viewportHeight ( ) const

Definition at line 45 of file qgeomap.cpp.

References d.

Referenced by QGeoTiledMapNokia::evaluateCopyrights(), QDeclarativeGeoMap::pan(), and QDeclarativeGeoMap::visibleRegion().

Here is the caller graph for this function:

◆ viewportSize()

QSize QGeoMap::viewportSize ( ) const

Definition at line 33 of file qgeomap.cpp.

References d.

◆ viewportWidth()

int QGeoMap::viewportWidth ( ) const

Definition at line 39 of file qgeomap.cpp.

References d.

Referenced by QGeoTiledMapNokia::evaluateCopyrights(), QDeclarativeGeoMap::pan(), and QDeclarativeGeoMap::visibleRegion().

Here is the caller graph for this function:

◆ visibleArea()

QRectF QGeoMap::visibleArea ( ) const

Definition at line 238 of file qgeomap.cpp.

References d.

Referenced by QDeclarativeGeoMap::initialize(), setVisibleArea(), and QDeclarativeGeoMap::visibleArea().

Here is the caller graph for this function:

◆ visibleAreaChanged

void QGeoMap::visibleAreaChanged ( )

signal

Referenced by QDeclarativeGeoMap::initialize(), and setVisibleArea().

Here is the caller graph for this function:

◆ visibleRegion()

QGeoShape QGeoMap::visibleRegion ( ) const

virtual

Definition at line 106 of file qgeomap.cpp.

References geoProjection(), and QGeoProjection::visibleRegion().

Referenced by QDeclarativeGeoMap::visibleRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

Friends And Related Symbol Documentation

◆ QDeclarativeGeoMap

friend class QDeclarativeGeoMap

friend

Definition at line 138 of file qgeomap_p.h.

The documentation for this class was generated from the following files:

qtlocation/src/location/maps/qgeomap_p.h
qtlocation/src/location/maps/qgeomap.cpp

Public Types

Signals

Public Member Functions

Protected Member Functions

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Capability

◆ ItemType

Constructor & Destructor Documentation

◆ ~QGeoMap()

◆ QGeoMap()

Member Function Documentation

◆ activeMapType()

◆ activeMapTypeChanged

◆ addMapItem()

◆ anchorCoordinateToPoint()

◆ cameraCapabilities()

◆ cameraCapabilitiesChanged

◆ cameraData()

◆ cameraDataChanged

◆ capabilities()

◆ clearData()

◆ clearMapItems()

◆ copyrightsChanged

◆ copyrightsImageChanged

◆ copyrightsStyleSheet()

◆ copyrightsStyleSheetChanged

◆ fitViewportToGeoRectangle()

◆ geoProjection()

◆ handleEvent()

◆ mapHeight()

◆ mapWidth()

◆ maximumCenterLatitudeAtZoom()

◆ minimumCenterLatitudeAtZoom()

◆ minimumZoom()

◆ prefetchData()

◆ removeMapItem()

◆ setAcceptedGestures()

◆ setActiveMapType()

◆ setBearing()

◆ setCameraCapabilities()

◆ setCameraData()

◆ setCopyrightVisible()

◆ setItemToWindowTransform()

◆ setViewportSize()

◆ setVisibleArea()

◆ sgNodeChanged

◆ supportedMapItemTypes()

◆ updateSceneGraph()

◆ viewportHeight()

◆ viewportSize()

◆ viewportWidth()

◆ visibleArea()

◆ visibleAreaChanged

◆ visibleRegion()

Friends And Related Symbol Documentation

◆ QDeclarativeGeoMap